SATELLITE RADIO OnyX : QUICK START GUIDE
• What's in the Box? ((!>
~ ..... ~ :z:: cu 0 Connect the Home Dock and Dock the Radio Select a location in close proximity to your stereo system or powered speakers, and also where the cable from the Indoor/Outdoor Home Antenna can reach the Home Dock. The location should be easily accessible and provide good visibility of the display, but should not be located where it will be in direct sunlight, which will reduce the visibility of the display screen. e Place & Aim the Indoor/Outdoor Home Antenna a.
• Onyx Main Display When listening to a channel, information about the channel and w hat is currently playing is displayed. Channel Number I • Channel Name I Power Button Press to t urn Onyx on and off. Select Button Press to confirm selec t ion of highlighted items in a menu or list. Not Used - Artist Name or Talk Show Host or Sports Teams/ Score I Antenna Signal Strength • - /FM Button FM: Press to access and cycle thro ug h FM p resets (Vehicle Dock only). -:No t used.
Dock & Play Radio + Home Kit User Guide
If you experience problems with the operation or performance of your SiriusXM product, DO NOT RETURN THIS PRODUCT TO YOUR RETAILER. Call SiriusXM Listener Care at 1-866-746-7961 and speak to one of our service representatives.
Table of Contents Introduction. . . . . . . . . . . . . . . . . . . .5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Safety and Care Information . . . . . . . . . . .7 What’s in the Box? . . . . . . . . . . . . . . . . . . .9 Onyx Functions . . . . . . . . . . . . . . . . . . . . . 10 Home Dock . . . . . . . . . . . . . . . . . . . . . . . . . 11 Remote Control Functions . . . . . . . . . . . . 12 Home Installation . . . . . . . . . . . . . .
4
Introduction 5
Introduction Features Thank you for purchasing the XM Onyx with Home Kit! XM Onyx has these exciting features to enhance your overall experience: Add SiriusXM to a home audio system or powered speakers with easy, do-ityourself set-up. Choose from six different display colors to suit your environment, and personalize with the trim rings. Use the remote control to conveniently operate your Radio from across the room. Browse other channels while listening to the current one.
Safety and Care Information IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device. Sirius XM Radio Inc. disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes. Do not expose to extreme temperatures (above 140˚F or below -4˚F, or above 60˚C or below -20˚C). Do not expose to moisture. Do not use device near or in water. Do not touch the device with wet hands.
Introduction Warning! Opening the case may result in electric shock. Make sure that you insert the Home Power Adapter’s plug all the way into the outlet. If the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water. If the liquid crystal fluid comes into contact with your eyes, flush the eyes with clean water for at least 15 minutes and seek medical care.
What’s in the Box? menu FM jump 1 2 3 4 5 6 7 8 9 0 direct Onyx Radio Trim Rings Home Dock Trim Ring Removal Tool info display fm Indoor/Outdoor Home Antenna Home Power Adapter Stereo Audio Cable menu direct mute + 1 2 3 4 5 6 7 8 9 jump 0 fav Remote Control 9
Introduction Onyx Functions Up and Down Buttons Press to preview and tune to channels through the channel lineup; also press to scroll through lists and highlight menu items. Left and Right Buttons Press to search for channels by category. Select Button Press to confirm selection of highlighted items in a menu or list. menu FM jump 1 2 3 Number Buttons Press to tune to a stored favorite channel, press and hold to store a favorite channel; also enter a channel number.
Home Dock Color-Coded Connections The color-coded Home Dock makes it simple to connect. Just match the colors on the cable ends to the colors on the dock to see what goes where. Rear View AUDIO AUDIO (Green) Connection for stereo system or powered speakers. ANT ANT (Silver) Connection for the Indoor/ Outdoor Home Antenna. POWER POWER (Red) Connection for Home Power Adapter.
Introduction Remote Control Functions Power Button Press to turn Radio on and off. Arrow Buttons Up/Down Press to preview and tune to channels through the channel lineup; also press to scroll through lists and highlight menu items. Not Used Select Button Press to confirm selection of highlighted items in a menu or list. Arrow Buttons Left/Right Press to search for channels by category. Not Used Not Used — / FM Button FM: Press to access and cycle through FM presets (Vehicle Dock only). — : Not used.
Home Installation 13
Home Installation There are several parts to setting up your Home Kit. Follow these 4 steps for an easy installation. Step 1: Connect the Home Dock and Dock the Onyx Radio When installing the Home Dock in your home, choose a location in close proximity to your stereo system or powered speakers, and also where the cable from the Indoor/Outdoor Home Antenna can reach the Home Dock.
B. Connect the Home Power Adapter Connect the Home Power Adapter to the red Power connector at the rear of the Home Dock, and plug it into a wall outlet. AUDIO ANT POWER C. Dock the Onyx Radio menu FM Place your Onyx Radio into the Home Dock and press the Power button to turn it on.
Home Installation Step 2: Place and Aim the Indoor/Outdoor Home Antenna To begin, try experimenting with the Indoor/Outdoor Home Antenna to get a feel for the reception in your location. In major metropolitan areas, you might find that you get great reception in several locations without worrying too much about aim and placement. If two to three bars of signal strength are being displayed at the lower left corner of the screen, continue with step 3 on page 21.
Other Indoor/Outdoor Home Antenna Installation Suggestions NOTE! If the signal reception is low, intermittent, or Acquiring Signal is displayed, after a period of time the Radio may enter demo mode. Demo mode is a feature for retail display purposes, and the Radio will automatically exit demo mode once it begins to receive a good signal. To exit demo mode immediately, press and hold the Select button for 10 seconds.
Home Installation can sometimes cause reception issues. If this is the case, you may want to use another window or place the antenna outside of the window. If you find a window that gives you good signal strength, you can place the antenna on the windowsill. The antenna may need to be placed on something to raise it above the level of the window frame.
four screws (not included) with a 1/4” head (e.g., an M3 screw), and that are suitable for the material onto which you are affixing the antenna, (e.g., wood, metal, etc.). The screws should be spaced 1-3/8” apart horizontally and 1-1/8” vertically. Refer to the template on “Indoor/Outdoor Home Antenna Template” on page 77. OUTDOORS SOUTH Once you have found a suitable location for the antenna, route the antenna cable to the Home Dock.
Home Installation until you find one where are receiving a good signal. The Indoor/Outdoor Home Antenna’s reception can also be tweaked by opening or closing the antenna clamshell, and turning the antenna. While observing the signal strength, make small adjustments to the angle of tilt of the clamshell until the highest possible signal strength is achieved. If you have not wall-mounted the antenna, turn the antenna slightly to the right or left and observe if the signal strength increases.
Step 3: Connect the Home Dock to a Stereo System or Powered Speakers The Home Dock can be connected to your stereo system, or to a set of powered speakers. If you are connecting to a stereo system, see the following section. If you are connecting to a set of powered speakers, see “To Connect the Home Dock to Your Powered Speakers” on page 22.
Home Installation 4 If you have connected everything correctly, and you are receiving the XM signal, you should hear the XM audio from channel 1. 5 The audio level of your Radio can also be adjusted, if necessary. Refer to “Set Audio Level” on page 49 to adjust the audio level. To Connect the Home Dock to Your Powered Speakers The Home Dock can be connected directly to a set of powered speakers. 1 Connect the 1/8” (3.
Step 4: Subscribe You can either follow the general activation and subscription process or use the on-board activation guide to activate your Onyx and subscribe to the XM service. General activation and subscription process: 1 Make sure your Onyx is turned on, tuned to XM Preview channel 1, and receiving the XM signal so that you can hear the XM audio. 2 Make a note of the XM Radio ID.
Home Installation Press or to tune to other channels, and or to browse the different categories of channels. Learn what all the buttons do by turning to “Navigation Basics” on page 27. Activation guide: For your convenience, Onyx has an on-board activation guide. You can activate your radio and subscribe to the XM service by using this guide, where you will be guided step-by-step through the subscription process.
Using Your Onyx 25
Using Your Onyx The Main Display When listening to a channel, information about the channel and what is currently playing is displayed.
Navigation Basics Power Button Pressing the Power button turns Onyx On or Off. Navigation Buttons Pressing Left, Right, Up, and Down navigates through various features and functions of Onyx. Left or Right button: Displays the channel categories such as Rock, Pop, Sports, Talk/News, etc. Repeated presses cycle through the categories one at a time. Also, decreases or increases the settings of various menu options such as Brightness, Audio Level, etc.
Using Your Onyx Menu Button menu Pressing menu displays various options to make setup and feature changes. Pressing menu when in menu options returns to the previous menu option screen until menu options is exited. Pressing and holding menu returns to the main display screen in most instances. FM Button (Applies to Vehicle Dock) FM Pressing FM provides easy tuning of FM presets for optimized PowerConnect performance.
Listening to Satellite Radio Tune to a channel: 1 Press and release channel. and to immediately tune to the next or previous 2 Press and hold and to quickly scroll through the channels. Release to tune to the channel that is displayed. TIP! You can also use the Remote Control to control the Radio. View a category: Channels are organized into categories to make it easier for you to find the ones that suit your taste. To view a category press 1 or Rock .
Using Your Onyx Direct Tune A channel can be tuned directly by entering the channel number using the number buttons. 1 To directly tune to a channel press direct. 2 Use the number buttons 0-9 to enter the channel number and wait a moment until the channel is tuned, or press the Select button to immediately tune to the channel.
Favorite Channels You can set up to 10 of your favorite channels so you can easily access them. Each favorite channel can be assigned to a number button. To assign a favorite channel to a number button: 1 Tune to the desired channel. 2 Press and hold a number button between 0-9 that you want to assign to that favorite channel. An advisory with the channel number and name will be displayed on the screen confirming that the channel has been assigned.
Using Your Onyx Scanning Channels in a Category You can scan a category and listen to each channel for 10 seconds before Onyx automatically tunes to the next channel. If you want to stay tuned to the channel being played and stop the scan, just press the Select button. To scan a category: 1 Press or until the desired category is displayed. 2 Scroll down to highlight the last item in the category which will be Scan and the category name. 3 Press the Select button. The scan will begin.
Special Features 33
Special Features Color Themes You can change the color of the display screen to one of 6 color themes: Blue, Red, Amber, Yellow, Silver, or Teal. You can choose the display color that matches your dash lights, and personalize with the trim rings. The default color theme is blue. To change the color theme: 1 Press menu. 2 Press to scroll to and highlight Color Theme. Press the Select button. 3 Press or to highlight the desired color theme. Onyx will immediately change to the selected color theme.
Trim Rings Your Onyx has a changeable Trim Ring to style the Radio to your liking. The Trim Ring surrounds the Select button on the Radio. A total of three trim rings are included with your Onyx, including the one that is already installed in the Radio. 1 2 3 4 5 me n 6 u 7 FM 8 9 jum 0 dir ec p t To remove and replace the Trim Ring: The Trim Ring can be removed by using the Trim Ring Removal Tool.
Special Features 1 Place the Trim Ring Removal Tool on the Trim Ring on the Radio. Use care to align the tool so it’s centered on the Trim Ring. menu FM jump 1 2 4 3 5 6 9 8 7 0 d ire ct 2 Using mild pressure to keep the tool against the Trim Ring, rotate the tool counter-clockwise until it will not rotate any further. menu FM jump 1 3 36 2 3 4 5 6 7 8 9 0 direct The Trim Ring is now loose. Turn Onyx over and the Trim Ring should fall out.
4 Turn the Radio face up again and insert the new Trim Ring into the Radio. 5 Align the Trim Ring Removal Tool on the Trim Ring on the Radio. Use care to align the tool so it’s centered on the Trim Ring. 6 Using mild pressure to keep the tool against the Trim Ring, rotate the tool clockwise until it will not rotate any further. The new Trim Ring is now installed.
Special Features Parental Controls Onyx has a parental control feature which allows you to lock access to channels, or lock access to an entire category. A 4-digit code controls access to the locked channel or locked category. When you browse a category, the number of the locked channel will be shown but not the artist and song/program information. Instead, a lock icon and the word “Locked“ is shown.
i. For each digit, press one of the 0-9 keys and then press to advance to the next digit. (Press if you need to go back and edit a previous digit.) ii. When you have selected all 4 digits of your code press the Select button. iii. The Code Confirmation screen will be displayed. For your records, write down the code you have selected. Press the Select button. Continue with step 3. If you had previously selected a 4-digit code you will be prompted to enter your code: i.
Special Features To lock (or unlock) channels or categories: 1 Press menu. 2 Press to scroll to and highlight Parental Controls. Press the Select button. 3 You will be prompted to enter the 4-digit code. For each digit, press one of the 0-9 keys and then press to advance to the next digit. (Press if you need to go back and edit a previous digit.) 4 When you have entered all 4 digits of the code press the Select button.
category and press the Select button. The lock icon will disappear indicating the channel or category is unlocked.) 8 You can continue to lock and unlock as many channels or categories as you wish. When you are finished, press and hold menu to return to the main display screen. To change your code: 1 Press menu. 2 Press to scroll to and highlight Parental Controls. Press the Select button. 3 You will be prompted to enter your existing 4-digit code.
Special Features displayed. For your records, write down the code you have selected. Press the Select button. 9 Press and hold menu to return to the main display screen. To listen to a locked channel: There are two ways to tune to a channel which has been locked. The first is to directly tune to the locked channel, and the second is to select the locked channel from a category list. 1 Directly tune to or select the locked channel: To directly tune to a locked channel: i.
Where Else Can You Use Your Onyx? 43
Where Else Can You Use Your Onyx? SiriusXM offers a variety of accessories that allow you to adapt your Onyx to your lifestyle and enhance your listening experience. With these accessories, you can effortlessly take your Satellite Radio listening experience from your home or office to your vehicle or on the go — all with a single subscription. In Your Vehicle – With Vehicle Kits, you can enjoy your Onyx in each of your vehicles. In Your Office, Other Homes, etc.
Configuring Your Onyx 45
Configuring Your Onyx Radio ID Your Onyx has an 8 character alphanumeric ID which uniquely identifies your Radio. This ID is used during the subscription process. To display the Radio ID: 1 Press menu. 2 Radio ID will be highlighted. If it is not highlighted, press to scroll to and highlight Radio ID. Press the Select button. The Radio ID will be displayed. 3 46 Radio ID Press and hold menu to return to the main display screen.
Jump Settings The jump button can be configured to either jump back to the last channel to which you were listening, or to jump to the traffic and weather for the city of your choice from a list of 22 of the most congested cities. When configuring for traffic/weather, you’ll be prompted to select your city. To configure jump: 1 Press menu. to scroll to and highlight 2 Press JUMP Settings and press the Select button.
Configuring Your Onyx desired location and press the Select button. 7 The JUMP Settings screen will display the location you selected. Press and hold menu to return to the main display screen. Set Location Atlanta Baltimore Boston Chicago Dallas Set Brightness To change the display’s brightness: 1 Press menu. 2 Press to scroll to and highlight Brightness and press the Select button. 3 Press to decrease or to increase the brightness of the display.
Set Audio Level The audio level of Onyx can be adjusted when an audio connection is made between the dock and the stereo system or powered speakers. Audio level is used to adjust Onyx’s volume level to match the volume of other audio sources you may use, such as a CD player, or an MP3 player, etc. Do not use the audio level as a volume control. Use the volume control on your stereo system or powered speakers instead. To adjust the audio level: 1 Press menu.
Configuring Your Onyx Signal Indicator For best reception, your antenna should have an unobstructed view of the XM satellites. In large cities, there are terrestrial transmitters (ground repeaters) to help increase the signal coverage. Your Onyx can display the strength of the satellite and terrestrial signals being received. To display the signal strength: 1 Press menu. 2 Press to scroll to and highlight Signal Indicator and press the Select button.
Factory Settings The factory settings menu has two choices, AUX Detect and Restore Defaults. AUX Detect applies to the Vehicle Dock only (refer to page 61). Restore Defaults You can clear all of your personal settings, such as favorite channels, color theme, etc., and return the Radio to its original out-of-thebox settings Factory Settings AUX Detect enabled Restore Defaults To reset Onyx to factory defaults: NOTE! Restoring defaults permanently removes all personal settings. 1 Press menu.
Configuring Your Onyx Demo Mode Your Onyx has a demo mode that starts playing when, for a prolonged period of time (more than 5 minutes), the Radio either detects it’s not connected to the antenna, or the antenna stops receiving a signal. It disappears when the antenna is connected properly or when the Radio starts receiving a signal. You can also exit demo mode at any time, by pressing and holding the Select button for 10 seconds. If desired, you can also manually put Onyx in demo mode.
6 To exit demo mode at any time, press and hold the Select button for 10 seconds. Demo Mode Entering Demo Mode.
54
Using Onyx with a Vehicle Dock 55
Using Onyx With a Vehicle Dock This section contains information applicable only when using your Onyx with a Vehicle Dock. If you purchase an XM Dock and Play PowerConnect Additional Vehicle Kit to use your Onyx in your vehicle, follow the instructions included with the kit for installation.
Once you have found an available FM channel, you’ll need to tune Onyx and your vehicle’s radio to the same FM channel to receive XM audio through your vehicle’s radio. We recommend one of the following methods to find an available FM channel: 1 Use the SiriusXM FM Channel Finder Use the SiriusXM FM Channel Finder at www.siriusxm.com/frequency. Go to the website and enter your zip code. The Channel Finder will suggest a list of available FM channels in your area.
Using Onyx With a Vehicle Dock Tune Onyx to a favorite XM channel (or to channel 1, if it’s not activated). Pick the first FM channel on your list and tune the FM radio to that channel. Then tune Onyx to the same FM channel. (Refer to “Set and Select an FM Channel” on page 59.) You should hear the XM channel through your vehicle’s radio.
Set and Select an FM Channel Onyx allows you to easily store (i.e., preset) up to 5 different FM channels. At any time, you can select any one of these 5 FM presets to hear SiriusXM through your existing vehicle radio. Having a choice of 5 FM presets also makes it easy to switch to the appropriate FM channel as you travel from one area to another. Each FM preset is stored in its own storage location. You can easily add or edit the FM preset in any one of the 5 storage locations.
Using Onyx With a Vehicle Dock (denoted by “current”), then the FM channel tuning screen is displayed. ii. If the chosen storage location has an FM preset that is not currently being used, and you want to edit it, Edit Channel is highlighted. Press the Select button. The FM channel tuning screen is displayed. iii. If the chosen storage location has an FM preset that is not currently to highlight being used, and you want to start using it, press Start Using and press the Select button. Skip to step 7.
IMPORTANT! You’ll first need to find a suitable FM channel that is unused or available in your area. FM Presets FM presets make it easy to quickly access stored FM channels and choose a new FM channel from them. Use FM presets when you use PowerConnect or the FMDA to listen to your Onyx through your vehicle’s FM radio. To use a different FM preset: 1 Press FM to display the current FM preset. 99.3 FM 2 To display and select the next FM preset, press FM. The Radio will tune to the displayed FM channel.
Using Onyx With a Vehicle Dock channels in your area. Refer to”Find Available FM Channels in Your Area” on page 56. Next, refer to “Set and Select an FM Channel” on page 59. Auto Shut Off Auto Shut Off is applicable only when Onyx is in a Vehicle Dock. Onyx will automatically shut off after 8 hours of inactivity, i.e., when no buttons have been pressed. This feature prevents the vehicle battery from being discharged if you forget to turn your Onyx off.
If you are connecting the audio through your vehicle’s FM radio (SureConnect or FMDA): 1 Disable the AUX Detect feature. Refer to “AUX Detect” on page 65, and disable AUX Detect. 2 Turn the FM Transmitter in Onyx On. Refer to “Turn FM Transmitter On/ Off” on page 63, and turn the FM Transmitter On. 3 Continue with the installation. If you are connecting the audio using the Aux In Cable or Cassette Adapter: 1 Disable the AUX Detect feature. Refer to “AUX Detect” on page 65, and disable AUX Detect.
Using Onyx With a Vehicle Dock To turn the FM Transmitter On: 1 Press menu. to scroll to and highlight FM 2 Press Settings and press the Select button. 3 FM Settings FM Transmitter FM Channels on FM Transmitter will be highlighted. Press the Select button to toggle the setting from Off to On. 4 The FM Channels menu item will now be accessible, allowing you to tune Onyx and the FM radio in your vehicle to the same FM channel. TIP! Onyx is programmed with FM channel 97.9 as the default setting.
Cable. Press the Select button to confirm that you want to turn off the FM Transmitter. 5 Press and hold menu to exit. Turn OFF FM? Please connect an AUX cable or no audio will be available. Press Select to confirm AUX Detect AUX Detect allows Onyx to automatically detect a connection made to the AUDIO connector of the PowerConnect Vehicle Dock by an Aux In Cable or Cassette Adapter. AUX Detect is enabled by default.
Using Onyx With a Vehicle Dock 2 Press to scroll to and highlight Factory Settings and press the Select button. 3 AUX Detect should be highlighted and show as enabled. Press the Select button to toggle the setting. 4 A warning screen will be displayed. Press the Select button to confirm that you want to disable AUX Detect. Disable AUX Detect? 5 If you want to cancel press menu to return to Factory Settings. AUX Detect will remain enabled.
Troubleshooting 67
Troubleshooting Onyx has been designed and built to be trouble-free but if you experience a problem, try this: Check that all connections are firm and secure. Make sure you have connected the Home Dock as described in this User Guide. Verify that the AC power outlet is working. If you see this on the screen: Try this: Acquiring Signal Move the antenna to a south-facing window. Not sure which way is south? Think about where the sun rises (in the east) and sets (in the west).
If you see this on the screen: Try this: Updating Your Onyx is updating with the latest encryption code. Wait until the update is done. You may be trying to tune to a channel that is blocked or unavailable. Tune to another channel. — No program information, such as artist name, song title, or channel exists.
Troubleshooting If this happens: Try this: Traffic and Weather channels sound different from other channels These channels use a different audio technology than other channels so they often sound different from other channels. The demo is playing Your Indoor/Outdoor Home Antenna is not connected or you are not receiving the XM signal. Check that the antenna is connected properly and is not obstructed. Press and hold the Select button for 10 seconds to exit Demo Mode. You can disable Demo Mode.
Product Specifications 71
Product Specifications System Power Requirements: Operating Temperature: Audio Output: Onyx Radio Dimensions: Weight: Home Dock Dimensions: Weight: Audio Connector: Antenna Connector: 110 V AC, 400 mA (max) -4°F to +140°F (-20°C to +60°C) 1.5 Vrms (max) 4.5 in (width) x 2.4 in (height) x 0.7 in (depth) 115 mm (width) x 61 mm (height) x 17 mm (depth) 3.4 oz (95 g) 3.6 in (width) x 1.1 in (height) x 1.5 in (depth) 93 mm (width) x 29 mm (height) x 38 mm (depth) 3.8 oz (109 g) 1/8 in (3.
Patent and Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in this product. Furthermore, the AMBE™ voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc.
FCC Statement The user is cautioned that changes or modifications not expressly approved by Sirius XM Radio Inc. can void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Copyrights and Trademarks ©2011 Sirius XM Radio Inc. “Sirius”, “XM” and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. “BBC” and “Radio One” are trademarks of the British Broadcasting Corporation and are used under license. BBC logo © BBC 1996. Radio 1 logo © BBC 2001. Cosmopolitan™ is a registered trademark of Hearst Communications, Inc. Elvis Radio logo © EPE Reg. U.S. Pat & TM off. IndyCar (and Design) are registered trademarks of Brickyard Trademarks, Inc.
Owners Record The Radio model number is located below and the XM Radio ID is located on the label on the back of Onyx. Record the XM Radio ID in the space provided below. Refer to these numbers whenever you call your dealer regarding this product.
Indoor/Outdoor Home Antenna Template Indoor/Outdoor Home Antenna Template 1-3/8” 1-1/8” 77
78
SiriusXM 90-Day Limited Warranty What This Warranty Covers This warranty covers defects in material and workmanship for 90 days from the date of purchase by the original retail purchaser only. Sirius XM Radio Inc., at its sole option, will repair or replace the product with a new or reconditioned product without charge for parts and labor. Products replaced under this warranty become the property of SiriusXM.
siriusxm.com Sirius XM Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1.800.967.2346 © 2011 Sirius XM Radio Inc.
DOCK & PLAY ACCESSORY GUIDE
LISTEN ANYWHERE. ANYTIME. VEHICLE SOUND SYSTEM HOME TAKE SATELLITE RADIO WITH YOU Dock & Play Radios can be used in different locations, all w it h o ne subscript ion. Compatible accessories are available for listening at home, the office, outdoors or in multiple vehicles. Add SiriusXM Internet Radio to li sten on your sma rt phone, tablet, computer o r compat ible Internet connected device.'" · some channels not availabl e on line or on smartphones.
LISTEN MORE ON-THE-GO COMPUTER ADDITIONAL VEHICLE INSTALLATION ACCESSORIES C. DOCK & PLAY POWERCONNECT'" VEHICLE KIT MODEL: XADV2 • Every t hing you need to play a SiriusXM or XM Doc k & Play radio in a ve hic le - no need for a second subsc rip tio n • Hear SiriusX M t hrough an exi sti ng vehicle ste reo• w it h easy installation • Compa t ib le with SiriusXM and most XM Dock & Play rad ios" ·FM radio required, or use the Included AuxIn cable.
((>) SIRIUS XM Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1-866-635-2349 For more information, please visit www.siriusxm.com © 2012 Sirius XM Radio Inc., Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All other marks and logos are the property of their respective owners. All rights reserved. Accessory Guide (SXDPAGEN0712) OO.ABCDl.
Warning: • Opening the case may result in electric shock. • If your product has an LCD screen, and the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water. If the liquid crystal fluid comes into contact with your eyes, flush the eyes with clean water for at least 15 minutes and seek medical care. If the liquid crystal fluid is ingested, flush your mouth thoroughly with water.
Additional User Documents: Additional user documents are available at www.siriusxm.com/guides. Safety and Care Information: IMPORTANT! Self installation instructions and tips are provided for your convenience. It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation. SiriusXM shall have no liability for damage or injury resulting from the installation or use of any SiriusXM or third party products.
If you experience problems with the operation or performance of your SiriusXM product, DO NOT RETURN THIS PRODUCT TO YOUR RETAILER. Call SiriusXM Listener Care at 1-866-635-7191 and speak to one of our service representatives.
SiriusXM 90-Day Limited Warranty What This Warranty Covers This warranty covers defects in material and workmanship for 90 days from the date of purchase by the original retail purchaser only. Sirius XM Radio Inc., at its sole option, will repair or replace the product with a new or reconditioned product without charge for parts and labor. Products replaced under this warranty become the property of SiriusXM.
