Owner's Manual
Table Of Contents
Home Installation
observe
if
the signal strength increases.
For
each tweak, allow a few seconds
in
each position
to
determine
if
the signal strength increases.
SOUTH
If
the signal reception is good, but there is
no
audio, verify your audio connection.
• If you are connected to a home stereo system,
be
sure the system
is
set
to
the auxiliary input source,
and
you have connected the Stereo Audio Cable
to
the auxiliary input connectors.
• If you are connected to powered speakers,
be
sure the speakers are
plugged into
an
outlet,
and
are turned
On.
The
audio level of your radio
can
also
be
increased. Refer to the User Guide which
accompanied your radio
and
increase the audio level.
If you still have questions, for example, 'Are there any other options/things I
should consider?', etc., refer to "Troubleshooting"
on
page 22.