XMR6910 INSTALLATION/OWNERS MANUAL AM/FM/CD/XM Ready Receiver with Detach Face An optional XM Satellite Radio Receiver may be connected to the XMR6910. XM subscription is required for reception. For more information, visit XM’s website at www.xmradio.com or call 1-877-XMRADIO. Not available in Alaska or Hawaii.
XMR6910 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. (consult a qualified technician for instructions) • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 2 transit screws located on top of the unit.
XMR6910 INSTALLATION Wiring Diagram FUSE When replacing a fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XMR6910 uses one 10 amp ATM fuse located beside the wiring connector.
XMR6910 OPERATION Control Locations 1 3 2 22 21 20 19 4 18 17 16 15 5 14 6 7 8 13 12 11 1 Release 12 Local/Distance/*Preset 8 2 Power 13 AM/FM Scan/*Preset 7 3 Volume 14 Preset 6/Category Up 4 Tune/Track Down 15 Preset 5/Category Down 5 Tune/Track Up 16 Preset 4 6 Auto Store/Preset Scan/Function 17 Preset 3/Intro 7 Band/Pause/Scroll 18 Preset 2/Random 8 Eject 19 Preset 1/Repeat 9 Mode/Shift 20 Audio 10 EQ/*Preset 10 21 Display 11 Loudness/*Preset
XMR6910 OPERATION General Operation Faceplate Removal Semi-permanent Faceplate Installation Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Remove trim ring and install supplied Phillips head #1 screw through left side of mounting frame into faceplate. Power On/Off Press POWER or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically.
XMR6910 OPERATION General Operation Display When in AM/FM, CD or AUX mode: Press DISP to select between clock and radio frequency (tuner mode), clock and CD elapsed time/track (CD mode), or clock and AUX (AUX mode). When in XM Radio mode: Press DISP to select between channel name, artist name, song title or clock. Set the Clock With the unit on, press and hold DISP until clock begins to flash, then release. Press TUNE to adjust the hours and TUNE to adjust the minutes.
XMR6910 OPERATION General Operation Audio Press AUDIO to select between Volume (default), Bass, Treble, Balance & Fader.
XMR6910 OPERATION AM/FM Tuner Operation Seek Tuning Press TUNE nn or TUNE ll momentarily to seek the next strong station. Manual Tuning Scan Tuning Local/Distance Band Frequency Spacing nn nn ll Press SCAN to preview strong stations on the current band, pausing for 5 seconds at each. Press SCAN again to cancel. Press LOC to activate local tuning for strong station reception only. Press LOC again to cancel and resume Distance tuning (default).
XMR6910 OPERATION XM Radio Activation Activating Your XM Receiver (Optional) 1. Press MODE to select XM Radio. 2. Verify channel 1 (XM Preview Channel) is playing. 3. Select Channel 0. The XM receiver’s eight character Radio ID number will appear on the XMR6910 display. The Radio ID number is also located on the top of the XM receiver unit. 4. Record the number here for future reference: 5. Activate your XM Satellite Radio service. To subscribe, log onto http://www.xmradio.
XMR6910 OPERATION XM Radio Operation Channel Search by Category Channel Search by Name Storing and Recalling Preset Channels Display Options Press FUNC once, the CATEGORY icon will appear on the display. Press or to choose a different category, then press TUNE or TUNE to choose a channel within that category. Press FUNC for 3 seconds to select the desired channel. If you do not select a channel, the channel search will time out after several seconds and the current channel will be retained.
XMR6910 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation (AM, FM, XM or auxiliary input). If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Press TRACK to skip to the beginning of the next track.
XMR6910 WARRANTY Limited One-Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship, under normal conditions, for a period of one year from the date of the original purchase. Dual Electronics Corp.
XMR6910 OPERATION Specifications CD Player Signal-to-noise: >92dB Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz General Total power output: 208 Watts Peak Power output: 52Wx4 @ 4 ohms, 14.
XMR6910 OPERATION Troubleshooting - General Problem Cause Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Black wire not connected Fuse blown Check connections for proper voltage (11~16VDC) Check connection to ground Replace fuse Unit has power (but no sound) Speaker wires not connected One or more speaker wires touching each other or touching chassis ground Yellow or red wire touching chassis ground Speaker wires touching ch
XMR6910 OPERATION Troubleshooting - XM Radio Problem Cause Action You can not receive any XM channels Your XM Radio receiver is not activated Contact XM as described on page 9 You can not tune into a specific XM channel You may not be authorized to receive that channel Verify your subscription with XM Contact XM as described on page 9 NO SIGNL appears on display The XM signal is blocked Move vehicle from obstructed area (such as inside a tunnel or a garage) ANTENNA appears on display This mess
Dual Electronics Corp. 21318 64th Ave. South Kent, WA 98032 Toll Free: 1-866-626-7863 www.dualav.com www.xmradio.com ©2004 Dual Electronics Corp. All rights reserved. The XM name and related logos are trademarks of XM Satellite Radio Inc.
