Satellite Radio User Guide

strength. You can also press menu

and then press

to scroll to and

highlight Signal Indicator. Press the

Select button. The Satellite and

Terrestrial bars show the strength of

the signal being received. If the

signal reception is good, press and

hold menu to return to the main

display screen.

7 Ensure onyX is tuned to channel 1.

Upon power up, onyX should tune to

channel 1 by default, when it’s not yet activated. If it’s not on channel 1,

refer to “Listening to Satellite Radio” on page 55 to learn about how to

tune a channel.

8 If you haven’t done so, turn on your vehicle’s stereo system. Set it to

play input from the cassette source.

9 You should hear XM channel 1 through your vehicle’s stereo system. You

are now ready to activate your onyX.

10 The audio level output of the onyX can be increased or decreased as

necessary to match the audio levels of other sources in your vehicle.

Refer to “Set Audio Level” on page 89.

If the signal reception is good, but there is no audio when tuned to channel 1, be

sure the vehicle’s stereo system is set to the correct source, i.e., cassette source

(step 8). Also be sure that the audio level is set high enough to be heard (step 10).

Refer to “Troubleshooting” on page 102 for additional help.

Signal Indicator

ATELLIT

TERRESTRIA

Vehicle Installation