Satellite Radio User Guide

windshield, route the cable out of the windshield molding and into the

rubber weather stripping around the door opening. Lift the weather

stripping from the opening and tuck the cable inside it, then replace

the weather stripping. Run the cable inside of the weather stripping

to the bottom of the door opening.

4. Pull the cable out of the weather stripping at the bottom of the

door opening and route it under the carpet toward the dashboard.

Coil any excess cable in a hidden location, such as under the carpet,

keeping it away from any vehicle pedals or controls. Secure the

excess cable with wire ties.

5. Bring the end of the cable out at the PowerConnect Vehicle Dock

location. Leave yourself enough cable so you can easily connect it

to the antenna connector of the dock.

6. Continue with “Step 5: Connect the Magnetic Mount Antenna and

PowerConnect Power Adapter” on page 37.

Vehicle Installation