Satellite Radio User Guide

knife or similar blunt tool to lift the plastic trim just enough to

tuck the cable under underneath. Avoid side airbag locations

on back pillars and above the doors. Airbag locations are

marked with “SRS” logos. Be careful not to crimp or cut the

cable.

5. Bring the cable out from the trim near the front of the cabin

and route it under the carpet toward the dashboard or console.

Coil any excess cable in a hidden location, such as under the

carpet, keeping it away from any vehicle pedals or controls.

Secure the excess cable with wire ties (purchased separately).

6. Bring the end of the cable out at the PowerConnect Vehicle

Dock location. Leave yourself enough cable so you can easily

connect it to the antenna connector of the dock.

7. Continue with “Step 5: Connect the Magnetic Mount Antenna

and PowerConnect Power Adapter” on page 37.