Instruction manual

Nomenclature
10. Mode indicator(M,S1 and S2): It indicateds the current flash mode.
11. Output level indicator: It can regulate the output power by setting the button, there are 8 levels
for output level adjustment. It indicates the output power and the fine-turning; it indicates the
coverage of the current focus length when adjusting the focus length
12. Test button
13. Mode switch button: The mode of the flash ligth will be switched among the M/S1/S2 in circle for
each press.
14. Charging indicator/Test button: The lighting of green light shows that charging process is finished
and flash can be used. the lighting of red light shows that it is in charging, the alternate flashing of
the green lights shows overheat protection. The red ligh blinking shows that shortage of power.
15. Power adjust button: The output power of the flash light can be adjusted through left button
16. Power switch: The power of the flash light can be opened or closed by hoding this button
for 2 Seconds.
17. Lamp holder electric zoom button
18. Power adjust button: The output power of the flash light can be adjusted through right button
19. ”SET”button: power adjust button
-5-