XT-4860G5 User Guide Model: XT-4860G5 FCC ID: GKM-XT4800 Version 1.
Table of Contents Document Change History .......................................................................................... 3 1 Introduction ............................................................................................................ 4 1.1 Feature Matrix................................................................................................................................................................................. 4 2 Hardware Description ............................
Document Change History Revision Date Author 1.0 1.1 1.2 5/23/2014 5/23/2014 5/27/2014 Johnny Chen Johnny Chen Johnny Chen 1.3 1.4 1.5 7/2/14 7/5/14 8/11/14 NB NB NB 1.6 1.7 1.8 8/13/14 8/14/14 8/20/14 NB NB NB Changes Document Creation Modified 4.2 to reflect the XT4860 Updated Table of Contents and changed 4.2 text type to fix TOC Changed Penta-Band to Dual band in 2.1 Removed pending from certifications in 2.1 Changed Bracket pic in 3.
1 Introduction XT-4860G5 is an energy harvesting global multi-band 3G platform supporting long term, remote deployments without the need to replace the self-charging battery. This installation guide describes the physical hardware, associated parts, the different mounting options available, and a quick start-up procedure. 1.
2 Hardware Description Below is a depiction of key interfaces of the XT-4860G5: Wake-up/ Zigbee Pairing Button Zigb Device Label 7-Pin Bayonet Connector Solar Panel LED Indicators The Associated Cable Harness that interfaces with the unit is shown below: 5
2.1 Hardware Specifications Technology Model Frequency Band GPS Specification Receiver 50 channels Receiver tracking Sensitivity Accuracy Cold Start Hot Start Power Requirements D.C. Power Battery Physical Connection Interface Connector Cellular/GPS Antenna SIM Access Programming Mechanical Case Material Dimension Weight Operating Temperature Certifications Product Carrier 3G UMTS/HSDPA/HSUPA XT-4860G5 Dual-band Support Band II – 1900 MHz Band V – 850 MHz 50 channels -161 dBm +/- 2.
2.2 Cable Harness Description Pin # Wire Color 1 2 White IN1 Black Green Ground Out Yellow 3 4 5 Pin Name Blue IN2 UART-Rx 6 Brown UART-Tx 7 8 Red Orange VBATT ADC Functional Description Port Characteristic Ignition Sense Input port 8v to 24v, Internally pulled low 2.4 to 24V, < 0.2 V Note: Internally pulled high Ground Output Port (Defaulted open circuit) External battery negative terminal Main battery voltage, DC Analog Input 3.
3 Device Mounting Options 3.1 Screw Mounting The XT-4860G5 has two flanges (two holes per) at each end of the housing for screw mounting the device to the mounting surface. 3.2 Magnetic Mounting The XT-4860G5 can also be equipped with magnets which support a load up to 10kg.
3.3 Optional Cradle Mounting An optional mounting cradle can be purchased for easy snap-on/snap-off device mounting for the XT-4860G5. The cradle will need to be screw-mounted on to the position desired.
4 Quick Start Guide 4.1 Device Wakeup To start up the device, simply hold the black button located near the circular connector on the side panel of the device for 3 seconds. You should see the blue “C” LED light up and then fade out. The LED will fast-blink when the device is successfully connected to the network.
4.2 Configuring the Device via SMS 1) 2) 3) 4) 5) 6) 7) 8) Ensure your device is active on your cellular account. Awaken device from sleep XT-4860G5 via the “wake-up” button. If the device needs more power, then supply 12V DC via the red wire of the cable harness. Ensure device cellular LED is blinking based on LED definition in this document.
FCC/IC: REGULATORY COMPLIANCE INFORMATION This equipment with FCC-ID: GKM-XT4800 and IC-ID: 10281A-XT-4800, Model: XT-4860G5 is subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules. NOTICE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and with license exempt Radio Standard Specifications of Industry Canada.
