User's Manual

30
5 RS232 Based Configuration Command Protocol
5.1 Wi-Fi Configuration
Type
Syntax
Response
ASCII
Set
+XT:4001,<WE>,<WSI>,<WSD>
$$<UID>,4001,<WE>,<WSI>,<WSD>##
Read
+XT:4001?
$$<UID>4001,<WE>,<WSI>,<WSD>##
Parameter
Type
Description
<WE>
Numeric
Wi-Fi Enable
 1: Enabled
 0: Disabled
 Default is 0 (Disabled)
<WSI>
Numeric
Wi-Fi Scanning Interval
 Valid Range is 0 – 86400 (seconds)
 0: Disabled
Default is 0 (Disabled)
<WSD>
Wi-Fi Scanning Duration
 Valid Range is 0 – 86400 (seconds)
 0: Disabled
Default is 0 (Disabled)
NOTE: If Scanning duration is larger than scanning interval, then the Wi-Fi module will be permanently
scanning.
5.2 GPS Configuration
Type
Syntax
Response
ASCII
Set
+XT:4002,<GE>,<GI>
$$<UID>,4002,<GE>,<GA>##
Read
+XT:4002?
$$<UID>,4002,<GE>,<GA>##
Parameter
Type
Description
<GE>
Numeric
GPS Enable
 1: Enabled
 0: Disabled
 Default is 0 (Disabled)
<GA>
Numeric
GPS minimum accuracy
 Valid Range is 0 – 255 (meters)
 0: Disabled
Default is 0 (Disabled)