User's Manual

19
Example text of the AES utility command, challenge and key.
b. Hit enter and the utility will send a response to provide to ZOC.
5. Highlight the response and right click the highlighted text.
6. As mentioned before you can check that your copy was copied correctly by using Start->Run or the local
typing field in ZOC before entering.
7. Right click in the local typing field to enter the response and hit ‘Enter’
a. If the Aux port has gone inactive hit ‘Enter’ until the port becomes active again and proceed with
sending the AES utility response:
8. The ZOC terminal should respond with ‘Accepted’.