Product Manual
Table Of Contents
- 1. Functional Description
- 2. Interfaces
- 3. Event Description and Default Mask
- 3.1. [6070] Wake on Software reset
- 3.2. [6071] Wake on Motion Start
- 3.3. [6072] Wake on Motion Stop
- 3.4. [6074] Wake on Periodic Motion
- 3.5. [6075] Wake on Periodic No-Motion
- 3.6. [6112] System Version Report
- 3.7. [6113] Image Capture
- 3.8. [6114] Power Report Event
- 3.9. [6115] Diagnostic Report Event
- 3.10. [6116] Wake on Door Open
- 3.11. [6117] Wake on Door Closed
- 3.12. [6118] Wake on Periodic Door Open
- 3.13. [6119] Wake on Periodic Door Closed
- 4. Parameters
- 4.1. AL (Altitude)
- 4.2. AX Accelerometer X Value
- 4.3. AY Accelerometer Y Value
- 4.4. AZ Accelerometer Z Value
- 4.5. BB Backup Battery Voltage
- 4.6. BLECHK Total BLE Ad Scans Last Sleep
- 4.7. BLEHIT Succesful BLE Ad Scans Last Sleep
- 4.8. BRNRST Brownout Resets
- 4.9. BV Battery Voltage
- 4.10. CQ (Cellular Signal Quality)
- 4.11. D (Date-Time)
- 4.12. DSA Door Sensor Version
- 4.13. EA External ADC Voltage
- 4.14. EV (Event Identifier)
- 4.15. GS (GPS Lock Status)
- 4.16. GSPT (GPS Speed)
- 4.17. HD (GPS Heading)
- 4.18. HIBRST Hibernate Resets
- 4.19. HP (GPS PDOP)
- 4.20. IFN Image File Name on Server
- 4.21. IG (Ignition Status)
- 4.22. LDSWERR Load Switch Voltage Errors
- 4.23. LDSWVOL Load Switch Voltage
- 4.24. LN (Longitude)
- 4.25. LT (Latitude)
- 4.26. MAINVOL Main Voltage (integer millivolts)
- 4.27. MI (Virtual Odometer GPS)
- 4.28. OT (Output State)
- 4.29. PM Last Reset Code
- 4.30. PSCA Psoc Application Version
- 4.31. PSCB Psoc Boot Version
- 4.32. PWRST Power-On Resets
- 4.33. SCA SC20 Application Version
- 4.34. SCOFFATT SC20 Power-Off Attempts
- 4.35. SCOFFERR SC20 Power-Off Errors
- 4.36. SCONATT SC20 Power-On Attempts
- 4.37. SCONERR SC20 Power-On Errors
- 4.38. SCS SC20 System Version
- 4.39. SEQ (Sequence Number)
- 4.40. SOLCUR Solar Current (integer magic........)
- 4.41. SOLVOL Solar Voltage (integer millivolts)
- 4.42. SP Speed
- 4.43. SV (GPS Satellites)
- 4.44. SWRST Software Resets
- 4.45. T Time
- 4.46. UNRST Unknown Resets
- 4.47. WDRST Watchdog Resets
- 5. Server Commands
- 5.1. [1024] Image Capture FTP Configuration
- 5.2. [7027] Image Capture Execute
- 5.3. [7028] Clear Occupancy Data
- 5.4. [9100] Pass-through Command
- 5.5. [9101] Log Sync FTP Configuration
- 5.6. [9102] Log Sync Execute
- 5.7. [9103] Generic FTP Configuration
- 5.8. [9104] Generic FTP Execute
- 5.9. [9105] Update Backup APK
- 6. Subsystems
- 7. Regulatory Statements
XT3182D Product Manual
Page 9 | 37
CONFIDENTIALAND PROPRIETARY
3. EVENT DESCRIPTION AND DEFAULT MASK
3.1. [6070] WAKE ON SOFTWARE RESET
Wake on Software Reset event is triggered by device power up or reset.
Default String UID, EV#, D, T, LT, LN, AL, SP, HD, SV, HP, BV, CQ, MI, GS, EA, BB, PM, AX, AY, AZ, SEQ
3.2. [6071] WAKE ON MOTION START
Wake on Motion Start is triggered by exceeding the accelerometer threshold within a specified time window. The
thresholds are configured with the !cs:56 command.
Default String UID, EV#, D, T, LT, LN, AL, SP, HD, SV, HP, BV, CQ, MI, GS, EA, BB, PM, AX, AY, AZ, SEQ
3.3. [6072] WAKE ON MOTION STOP
Wake on Motion Stop is triggered when the device does not exceed the accelerometer threshold within a
specified time window. The thresholds are configured with the !cs:56 command.
Default String UID, EV#, D, T, LT, LN, AL, SP, HD, SV, HP, BV, CQ, MI, GS, EA, BB, PM, AX, AY, AZ, SEQ
3.4. [6074] WAKE ON PERIODIC MOTION
Wake on Periodic Motion event is triggered when the accelerometer remains above the motion threshold during
a specified time window. The thresholds for the time window and accelerometer are configured with the !cs:56
command.
Default String UID, EV#, D, T, LT, LN, AL, SP, HD, SV, HP, BV, CQ, MI, GS, EA, BB, PM, AX, AY, AZ, SEQ
3.5. [6075] WAKE ON PERIODIC NO-MOTION
Wake on Periodic No-Motion event is triggered when the accelerometer remains below the motion threshold
during a specified time window. The thresholds for the time window and accelerometer are configured with the
!cs:56 command
Default String UID, EV#, D, T, LT, LN, AL, SP, HD, SV, HP, BV, CQ, MI, GS, EA, BB, PM, AX, AY, AZ, SEQ
3.6. [6112] SYSTEM VERSION REPORT
Reports firmware versions for the PSOCapplication, PSOCboot, SC20 application, SC20 system, and door sensor.
Before version DBz1.1178AA2.2 System Version was triggered on every reset.
After version DBz1.1178AA2.2 System Version is triggered on every wake.