Product Manual
Table Of Contents
- 1. Functional Description
- 2. Interfaces
- 3. Event Description and Default Mask
- 3.1. [6070] Wake on Software reset
- 3.2. [6071] Wake on Motion Start
- 3.3. [6072] Wake on Motion Stop
- 3.4. [6074] Wake on Periodic Motion
- 3.5. [6075] Wake on Periodic No-Motion
- 3.6. [6112] System Version Report
- 3.7. [6113] Image Capture
- 3.8. [6114] Power Report Event
- 3.9. [6115] Diagnostic Report Event
- 3.10. [6116] Wake on Door Open
- 3.11. [6117] Wake on Door Closed
- 3.12. [6118] Wake on Periodic Door Open
- 3.13. [6119] Wake on Periodic Door Closed
- 4. Parameters
- 4.1. AL (Altitude)
- 4.2. AX Accelerometer X Value
- 4.3. AY Accelerometer Y Value
- 4.4. AZ Accelerometer Z Value
- 4.5. BB Backup Battery Voltage
- 4.6. BLECHK Total BLE Ad Scans Last Sleep
- 4.7. BLEHIT Succesful BLE Ad Scans Last Sleep
- 4.8. BRNRST Brownout Resets
- 4.9. BV Battery Voltage
- 4.10. CQ (Cellular Signal Quality)
- 4.11. D (Date-Time)
- 4.12. DSA Door Sensor Version
- 4.13. EA External ADC Voltage
- 4.14. EV (Event Identifier)
- 4.15. GS (GPS Lock Status)
- 4.16. GSPT (GPS Speed)
- 4.17. HD (GPS Heading)
- 4.18. HIBRST Hibernate Resets
- 4.19. HP (GPS PDOP)
- 4.20. IFN Image File Name on Server
- 4.21. IG (Ignition Status)
- 4.22. LDSWERR Load Switch Voltage Errors
- 4.23. LDSWVOL Load Switch Voltage
- 4.24. LN (Longitude)
- 4.25. LT (Latitude)
- 4.26. MAINVOL Main Voltage (integer millivolts)
- 4.27. MI (Virtual Odometer GPS)
- 4.28. OT (Output State)
- 4.29. PM Last Reset Code
- 4.30. PSCA Psoc Application Version
- 4.31. PSCB Psoc Boot Version
- 4.32. PWRST Power-On Resets
- 4.33. SCA SC20 Application Version
- 4.34. SCOFFATT SC20 Power-Off Attempts
- 4.35. SCOFFERR SC20 Power-Off Errors
- 4.36. SCONATT SC20 Power-On Attempts
- 4.37. SCONERR SC20 Power-On Errors
- 4.38. SCS SC20 System Version
- 4.39. SEQ (Sequence Number)
- 4.40. SOLCUR Solar Current (integer magic........)
- 4.41. SOLVOL Solar Voltage (integer millivolts)
- 4.42. SP Speed
- 4.43. SV (GPS Satellites)
- 4.44. SWRST Software Resets
- 4.45. T Time
- 4.46. UNRST Unknown Resets
- 4.47. WDRST Watchdog Resets
- 5. Server Commands
- 5.1. [1024] Image Capture FTP Configuration
- 5.2. [7027] Image Capture Execute
- 5.3. [7028] Clear Occupancy Data
- 5.4. [9100] Pass-through Command
- 5.5. [9101] Log Sync FTP Configuration
- 5.6. [9102] Log Sync Execute
- 5.7. [9103] Generic FTP Configuration
- 5.8. [9104] Generic FTP Execute
- 5.9. [9105] Update Backup APK
- 6. Subsystems
- 7. Regulatory Statements
XT3182D Product Manual
Page 25 | 37
CONFIDENTIALAND PROPRIETARY
4.37. SCONERR SC20 POWER-ON ERRORS
Data Presentation
SONERR
Parameter Type Description
SCONERR Number of SC20 Power-On Errors.
4.38. SCS SC20 SYSTEM VERSION
Data Presentation
SCS
Parameter Type Description
SCS System version...
4.39. SEQ (SEQUENCE NUMBER)
Sequence reports the event sequence number. The numbers are associated with a XOR_FRAME and is stored to
non-volatile memory. This ensures sequence numbers are unique until the event log is reset, the device is power
cycled, or 4 billion events have been read from non-volatile memory.
Parameter Data Presentation
SEQ
Parameter Format Description
SEQ 3-digit (000 to 255) Event sequence number.