Product Manual
Table Of Contents
- 1. Functional Description
- 2. Interfaces
- 3. Event Description and Default Mask
- 3.1. [6070] Wake on Software reset
- 3.2. [6071] Wake on Motion Start
- 3.3. [6072] Wake on Motion Stop
- 3.4. [6074] Wake on Periodic Motion
- 3.5. [6075] Wake on Periodic No-Motion
- 3.6. [6112] System Version Report
- 3.7. [6113] Image Capture
- 3.8. [6114] Power Report Event
- 3.9. [6115] Diagnostic Report Event
- 3.10. [6116] Wake on Door Open
- 3.11. [6117] Wake on Door Closed
- 3.12. [6118] Wake on Periodic Door Open
- 3.13. [6119] Wake on Periodic Door Closed
- 4. Parameters
- 4.1. AL (Altitude)
- 4.2. AX Accelerometer X Value
- 4.3. AY Accelerometer Y Value
- 4.4. AZ Accelerometer Z Value
- 4.5. BB Backup Battery Voltage
- 4.6. BLECHK Total BLE Ad Scans Last Sleep
- 4.7. BLEHIT Succesful BLE Ad Scans Last Sleep
- 4.8. BRNRST Brownout Resets
- 4.9. BV Battery Voltage
- 4.10. CQ (Cellular Signal Quality)
- 4.11. D (Date-Time)
- 4.12. DSA Door Sensor Version
- 4.13. EA External ADC Voltage
- 4.14. EV (Event Identifier)
- 4.15. GS (GPS Lock Status)
- 4.16. GSPT (GPS Speed)
- 4.17. HD (GPS Heading)
- 4.18. HIBRST Hibernate Resets
- 4.19. HP (GPS PDOP)
- 4.20. IFN Image File Name on Server
- 4.21. IG (Ignition Status)
- 4.22. LDSWERR Load Switch Voltage Errors
- 4.23. LDSWVOL Load Switch Voltage
- 4.24. LN (Longitude)
- 4.25. LT (Latitude)
- 4.26. MAINVOL Main Voltage (integer millivolts)
- 4.27. MI (Virtual Odometer GPS)
- 4.28. OT (Output State)
- 4.29. PM Last Reset Code
- 4.30. PSCA Psoc Application Version
- 4.31. PSCB Psoc Boot Version
- 4.32. PWRST Power-On Resets
- 4.33. SCA SC20 Application Version
- 4.34. SCOFFATT SC20 Power-Off Attempts
- 4.35. SCOFFERR SC20 Power-Off Errors
- 4.36. SCONATT SC20 Power-On Attempts
- 4.37. SCONERR SC20 Power-On Errors
- 4.38. SCS SC20 System Version
- 4.39. SEQ (Sequence Number)
- 4.40. SOLCUR Solar Current (integer magic........)
- 4.41. SOLVOL Solar Voltage (integer millivolts)
- 4.42. SP Speed
- 4.43. SV (GPS Satellites)
- 4.44. SWRST Software Resets
- 4.45. T Time
- 4.46. UNRST Unknown Resets
- 4.47. WDRST Watchdog Resets
- 5. Server Commands
- 5.1. [1024] Image Capture FTP Configuration
- 5.2. [7027] Image Capture Execute
- 5.3. [7028] Clear Occupancy Data
- 5.4. [9100] Pass-through Command
- 5.5. [9101] Log Sync FTP Configuration
- 5.6. [9102] Log Sync Execute
- 5.7. [9103] Generic FTP Configuration
- 5.8. [9104] Generic FTP Execute
- 5.9. [9105] Update Backup APK
- 6. Subsystems
- 7. Regulatory Statements
XT3182D Product Manual
Page 15 | 37
CONFIDENTIALAND PROPRIETARY
4.9. BV BATTERY VOLTAGE
Data Presentation
BV
Parameter Type Description
BV Battery voltage.
4.10. CQ (CELLULAR SIGNAL QUALITY)
The CQ parameter indicates the received signal strength indication (RSSI) from the cellular modem. There are
periods of time, such as tower hand-off, when this value may not be valid for a short period of time.
Parameter Data Presentation
CQ
Parameter Type Description
CQ UINT8 The allowed range is 0 to 31. When the RF power level of the received signal is the
highest possible, the value 31 is reported. When it is not known, not detectable
or currently not available, 99 is returned.
4.11. D (DATE-TIME)
The D parameter provides UNIX epoch time; the number of seconds since the UNIX epoch. Seconds since
00:00:00 January 1, 1970 UTC.
Parameter Data Presentation
D
Parameter Format Description
D YYYY/MM/DD Seconds since 00:00:00 January 1, 1970 UTC. A value of 0 indicates that the
current time is not known.