Product Manual

XT2500 Product Manual
Page 90 | 92
CONFIDENTIAL AND PROPRIETARY
Command Function
:rycfg ... Read system config
:wycfg ... Write system config
:qycfg ... Query parameter information
:uycfg revert Revert all system configs in RAM (reload from FLASH; must be used before
:vycfg)
:vycfg Save system configuration
:uyscr x <serial_port_id> Run system script (after upload via xmodem)
:ryscr Read system script (not the interpreter script)
:wyscr Write a new system script (script created to recreate current parameters)
:wyval persist Force a save of persist data
:ryval stack Print out stack high water marks
:ryval time Print out current network, gps, and system times
:qyi Print out system information
:uycmd resync <new_
system_time_s>
Force system time to resync with available source. If time argument is
passed, use as new system time with lower priority than internal sources
:ryval hwid Print out the hardware ID value
Defined HWIDs:
Hex Description
0x01 Hwid_2400_A
0x02 Hwid_6370_A
0x03 Hwid_6374_A
0xff Hwid_6300_B
:wyval hwid <value> Set the hardware ID value
:wyval key <key_index>
<okok> <nkok> <oknk>
Change AES key, where key_index:
Index Description
0 Update
1 Customer
2 Transport
:wyval ptk <key_index>
<plaintext_key>
Change AES key, where key_index:
Index Description
0 Update
1 Customer
2 Transport
The desired key value is not encrypted. This command is only available via
physical connection to the device.