Product Manual

XT2500 Product Manual
Page 89 | 92
CONFIDENTIAL AND PROPRIETARY
6.6.17. One-Wire Bus
Command Function
:wwdm <mask> Sets one-wire bus debug mask
:wwdm ts <mask> Sets one-wire bus temp sensor debug mask
:wwdm drv <mask> Sets one-wire bus driver id debug mask
:ewm Enable one-wire bus debug channel monitoring
:dwm Disable one-wire bus debug channel monitoring
:rwi <channel 0/1> Read one-wire bus info
:rwval <channel 0/1> Read one-wire bus temp sensor value
6.6.18. OBD
Command Function
:qoi info Query OBD vehicle information
:qoi status Query OBD status information
:qoi persist Query OBD persisted information
:qoi trip Query OBD trip information
:qoi ss Query OBD snapshot parameter information
:qoi ss2 Query OBD snapshot additional parameter information
:qoval Query OBD calculated information
:qoi viol Query OBD Violations
:qost Query OBD state
:roval dtc Read OBD DTC List
:woval p <protocol> <cll> Set OBD protocol to a com logical link
:woval dtc <mil value> <total
dtc> <total ecu count>
Manually write DTC data (defaults to CAN protocol); if all fields are 0, DTCs
are cleared
:wocmd debug <0/1> Disable/enable obd debug log
:wocmd debug erase Erase OBD debug log
:wocmd debug lock Lock OBD debug off
6.6.19. System
Command Function
:cycfg Clear system configs (set all parameters to default/RAM only and
use:vycfgto make permanent)
:cycfg recipes Clear system configs (set all parameters to default/RAM only and
use:vycfgto make permanent); clear all recipes/appends from flash
:ehm Enable watchdog timer debug monitor
:gycfg x <serial_port_id>
"<name>"
Upgrade paramset via xmodem; "<name>" is the version of the paramset