Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 87 | 92
CONFIDENTIAL AND PROPRIETARY
Command Function
:utota s3 "<full S3 presigned
link>" <port> <type>[[[
<index>] "<filename>"] <rev>]
Request HTTPS file transfer (only on AAb6 currently).
"<full S3 presigned link>" https server string and path including file
extension
<port> is an https server port
<type> is an enumerated value:
Type Description
0 Bootloader firmware
1 Application firmware
2 Script binary firmware
3 Parameter text file
6 TPS
8 Overlay text file
10 Third party code
11 Third party data
<index> only applies to overlays
"<filename>" is arbitrary and optional name reported in :q1i response
<rev> is the user determined revision value
:rtval mno
:wtval mno <profile>
See Hardware ID and MNO select
6.6.15. Interpreter
Command Function
:erm [<trigger_index>] Enable interpreter debug channel monitoring [monitor only <trigger_id>]
:drm Disable interpreter debug channel monitoring
:xrmsg <user_event_id> Send a user_event to the interpreter
:grscr x <serial_port_id>
"<name>"
Upgrade interpreter script via xmodem (SeeTBD; formerlyLoad a Compiled
Script to a Device
:rrscr Read interpreter script
:rrval odom <index> Read an odometer
Index Description
0 GPS Trip 1
1 GPS Trip 2
2 OBD Trip
3 GPS Life
4 OBD Life