Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 85 | 92
CONFIDENTIAL AND PROPRIETARY
Command Function
:sgsim coord <lat> <long> GPS simulator force coordinates
:sgsim speed <speed> GPS simulator force speed
Values are in tenths (e.g. 300 = 30 mph)
:sgsim head <heading> GPS simulator force heading
Values are in tenths (e.g. 900 = 90 degrees)
:sgsim lock <lock> GPS simulator force lock state:
Value Description
0 None
1 Unlocked
2 Locked
3 Sleep
4 LockedGood
:sgsim hdop <hdop> GPS simulator force hdop
:sgsim clear Disable GPS simulator
6.6.14. Cellular
Command Function
:rtdm Read transport debug mask
:wtdm <mask> Write the transport debug mask
mask Values:
Hex Description
0x000 GSMDebug_None
0x001 GSMDebug_State
0x002 GSMDebug_Command
0x004 GSMDebug_Response
0x008 GSMDebug_Parse
0x010 GSMDebug_ResponseHex
0x020 GSMDebug_Mux
0x040 GSMDebug_Backend
0x080 GSMDebug_Mno
0x100 GSMDebug_URC
0x200 GSMDebug_PDU
:etm Enable transport debug channel monitoring