Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 82 | 92
CONFIDENTIAL AND PROPRIETARY
Command Function
:rdval serial Read device serial number
:rdval uptime Read device uptime (seconds since reset)
:rdval wake Read device wake reason (only accurate if device has slept)
:wdval serial "<serial_no>" Write the device serial number
:qdi Query device info ("vtu query")
:qdi cell Query cellular device info ("vtu query modem")
:qdi gps Query GPS device info ("vtu query gps")
:udcmd checkin Send a Device Manager Check-In message todst[9]
:udcmd factory Reset device to factory state
:udcmd factory keys Reset device to factory state plus revert AES keys to defaults. This is the
only command available outside the AES console login.
:udcmd dslp <mask>
<minutes>
Enter deep sleep with <mask> wake setting
Mask Values:
Hex Description
0x0000 Ring
0x0001 Ignition
0x0002 Input 1
0x0004 Input 2
0x0008 Input 3
0x0010 Input 4
0x0020 Time
0x0040 Motion
0x0080 Battery
0x0100 Unplug
:udcmd slp <mask>
<minutes>
Enter sleep with <mask> wake setting
Mask Values:
Hex Description
0x0000 Ring
0x0001 Ignition
0x0002 Input 1
0x0004 Input 2
0x0008 Input 3
0x0010 Input 4
0x0020 Time
0x0040 Motion
0x0080 Battery
0x0100 Unplug