Product Manual

XT2500 Product Manual
Page 81 | 92
CONFIDENTIAL AND PROPRIETARY
6.6.6. Third Party
Command Function
:ejm EnableThird Partydebug channel monitoring
:djm DisableThird Partydebug channel monitoring
:djdbg DisableThird PartyXVBMG debug trace
:ejdbg EnableThird PartyXVBMG debug trace
:qji Print out parameter tag information
:qji diag Print out tag transaction diagnostic info
:gjfw x <serial_port_id> UpgradeThird Partyvia xmodem
:gjscr x <serial_port_id> <flag -
optional>
Upload VIS file via xmodem (flag = 1; erases all VIS's first)
:ujcmd tag <tag id> <ip_dst> Run XVBMG on tag id; if no VIS file found, downloads VIS first (:edm &
:ekm)
:ujcmd init InitializeThird Partyfunctions (:edm)
:ujcmd exec DisplaysThird PartyFW version (:edm)
6.6.7. Device
Command Function
:rdval reset Read device reset reason
Reason codes:
Code Reason Description
0 Power
applied
Main supply voltage connected to device
1 Low Power Reset caused by the micro Hibernation
module (not utilized)
2 Watchdog Reset caused by the micro Watchdog
module.
3 Software Reset caused by our device firmware.
4 User Main micro reset pin toggled (not
utilized)
5 Brownout Reset caused by the micro BOR module
6 Supply
Monitor
Not implemented.
7 Factory Reset Reset caused by the micro Hardware
System Service Request.
8 System Error Not implemented.
9 Unknown Catch for any other micro reset source
we have not defined.