Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 65 | 92
CONFIDENTIAL AND PROPRIETARY
ID Name Description
0xd3 OBD debug packet
Bytes Units Resolution Range
variable N/A N/A N/A
0xd4 Cell Access Technology Cell Access Technology values
Bytes Units Resolution Range
1 N/A N/A 0 to 7,255
0xd5 Derived Engine Seconds Derived engine seconds
Bytes Units Resolution Range
4 seconds 1 0 to
4294967295
0xd6 ECU Engine Seconds ECU engine seconds
Bytes Units Resolution Range
4 seconds 1 0 to
4294967295
0xd7 InputActiveStates Same as the Input States bitfield, only the reported states are
determined by the IDP config settings (seeInput State Bits table
below)
Bytes Units Resolution Range
1 N/A 1 0x0 to 0xff
0xd8 CellularEnvironment Each byte represents a different value
MSB LSB
[CSQ] [RSRP] [RSRQ] [CINR]
CINR is not currently implemented (always 0xFF).
RSRP & RSRQ are always 0xFF for modules that do not support
AT+CESQ.
Bytes Units Resolution Range
4 Varies 1 0 to 0xff (within
each byte)
0xdd GPSSpeed (high-
resolution)
Unsigned integer. Greater range equals higher accuracy.