Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 23 | 92
CONFIDENTIAL AND PROPRIETARY
VBUSMode
Value
Description Use Case
0 OBD-II Use this mode when you are sure you will be connected to a
passenger vehicle.
Supported transports per commlink:
Commlink0: J1850, Kline, HS Can
1 PPIDMode Use this mode when you are sure you will be connected to a
passenger vehicle, and want to enable proprietary PID collection.
Supported transports per commlink:
Commlink0: HS Can
Commlink1: MS Can, SW Can
Commlilnk2: Kline
2 Heavy Duty
Mode
Use this mode when you are sure you will be connected to a heavy-
duty truck.
Supported transports per commlink:
Commlink0: J1939, HS Can (Vin collection)
Commlink1: J1939, J1708
3 J1708 Only
Mode
Use this mode when you are sure you will be connected to a heavy-
duty truck with the 6 pin adapter cable.
Supported transports per commlink:
Commlink0: J1708
129 Auto-Detect
Mode
Use this mode when you are not sure if you will be connected to a
heavy-duty truck or a passenger vehicle.
Supported transports per commlink:
Commlink0: J1850, Kline, HS Can, J1939
Commlink1: J1939, J1708
255 Disable To disable all OBD comms