Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 19 | 92
CONFIDENTIAL AND PROPRIETARY
4.13. PACKET CREATION RECIPE (PCR)
Configuration instances: 128
Command Type Syntax
SET Command
:wycfg pcr[x] "<recipe_hex_string>"
Response
:OK
READ Command
:rycfg pcr[x]
Response
| pcr[x]: resipe_hex_string:"<recipe_hex_string>"
:OK
NOTE: This parameter does not have a factory default setting.
Parameter Description
recipe_hex_string Refer to Packet Creation Recipe for configuration details
4.14. THIRD-PARTY CONFIG VALUES (TPV)
Configuration instances: 1
Command Type Syntax
SET Command
:wycfg tpv <dst_index> <checkin_freq> <pid_list_1> <pid_list_2> <Flag_value>
Response
:OK
READ Command
:rycfg tpv
Response
| tpv: index:<dst_index> (hex_val), checkin:<checkin_freq> (hex_val), pidlst1:<pid_
list1>, pidlst2:<pid_list2>, flag:<Flag_value> (hex_val)
:OK
Parameter Range Description
dst_index 0 to 9 Destination config index that points to the Xirgo Gateway Server