Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 18 | 92
CONFIDENTIAL AND PROPRIETARY
4.12. TIMER DURATION (TMR)
Configuration instances: 32
Command Type Syntax
SET Command
:wycfg tmr[x] <Duration> <auto_start>
Response
:OK
READ Command
:rycfg tmr[x]
Response
| tmr[x]: sec:<Duration> (hex_val), flags:<auto_start> (hex_val)
:OK
Parameter Range Description
Duration 0 to
4294967295
The time that is set as the duration of the timer (s)
auto_start N/A Determines if the timer is set to start automatically or needs to be
manually started.
Index Description
0 Disables autostart
1 Enables autostart