Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 17 | 92
CONFIDENTIAL AND PROPRIETARY
Parameter Range Description
baudrate N/A Acceptable baudrates:
l 115200 bit/sec
l 57600 bit/sec
l 38400 bit/sec
l 19200 bit/sec
l 9600 bit/sec
l 4800 bit/sec
l 2400 bit/sec
l 1200 bit/sec
dps_value 3 Char Acceptable dps values: 8N1
Mode_value N/A Acceptable mode values:
Value Description
0 Console
3 Garmin
6 Aux Passthru -- Only one serial port can be an Aux Passthru
at any given time.
Console_print N/A Scripted console print from BuildAndSend() format
Value Description
0 (ASCII)
1 (Binary)