Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 14 | 92
CONFIDENTIAL AND PROPRIETARY
Parameter Range Description
<ip>|<hostname>|
<local serial>
64 Characters This id is the location specified by the dst. It can take the form of
an IP address (192.0.0.0), a hostname limited to 64
characters,or a local serial port. The valid local serial ports are as
follows:
l "SERIAL_AUX0"
l "SERIAL_AUX1"
l "USB"
port_number 1 to 65533 If using an IP address or a hostname, can be used to specify the
port on which to connect.
4.8. GENERIC CONFIG VALUE (GCV)
Configuration instances: 64
Command Type Syntax
SET Command
:wycfg gcv[x] <unsigned_long>
Response
:OK
READ Command
:rycfg gcv[x]
Response
| gcv[x]: value:<unsigned_long> (hex_val)
:OK
Parameter Range Description
unsigned_
long
0 to
4494967295
A generic configuration value accessible within a script.