Product Manual
Table Of Contents
- 1. Functional Description
- 2. Device Setup
- 3. Interfaces
- 4. Device Configuration
- 4.1. APNs (apn)
- 4.2. OBD Accel and Decel (oad)
- 4.3. OBD RPM and Speed Events (ors)
- 4.4. OTA Prevent (ota)
- 4.5. Bluetooth Enabled (blt)
- 4.6. Buzzer Songs (bzr)
- 4.7. Destination (dst)
- 4.8. Generic Config Value (gcv)
- 4.9. Input Default Polarity (idp)
- 4.10. Motion Sensitivity (mst)
- 4.11. Serial Port Settings (sps)
- 4.12. Timer Duration (tmr)
- 4.13. Packet Creation Recipe (pcr)
- 4.14. Third-Party Config Values (tpv)
- 4.15. GPS Solution Filter (gsf)
- 4.16. Vehicle Bus Configuration (vbs)
- 5. Interpreter
- 6. Command Language
XT2500 Product Manual
Page 11 | 92
CONFIDENTIAL AND PROPRIETARY
4.4. OTA PREVENT (OTA)
Configuration instances: 1
Command Type Syntax
SET Command
:wycfg ota <enable_mask>
Response
:OK
READ Command
:rycfg ota <enable_mask>
Response
| ota: enable:<enable_mask>
:OK
Parameter Description
enable_mask
Hex Description
0x0 OTA is not prevented due to OBDCommunications state or TPS Transfer
0x1 Prevent OTAwhen OBD Communications are Active (OBD
Communications detected)
0x2 Prevent OTAwhen TPS Transfer is Active (TPS Transfer is in progress)