User's Manual

Electromagnetic Compatibility Directive 89/336/EEC
Low Voltage Directive 73/23/EEC
Radio and Telecommunication Terminal Equipment 1999/5/EC
Applicable Standards
EN 50 082-1 – 1997 Electromagnetic Compatibility – Generic Immunity Standard, Part 1:
Residential, Commercial, Light Industry
EN61000-4-2 – Electromagnetic Compatibility for Industrial Process Measurement and Control
Equipment, Part 2: Electrostatic Discharge Requirements
EN61000-4-3 – Electromagnetic Compatibility for Industrial Process Measurement and Control
Equipment, Part 3: Radiated Electromagnetic Field Requirements
EN61000-4-4 – Electromagnetic Compatibility for Industrial Process Measurement and Control
Equipment, Part 4: Electrical Fast Transients Requirements
EN61000-4-5 – Surge Immunity Tests Basic EMC Standard
EN61000-4-6 – Immunity to Conducted Disturbances, Induced by Radio Frequency Fields
EN61000-4-11 – Voltage Dips, Short Interruptions and Voltage Variations
EN 300 328-2 V1.1.1 (2000-07) – Radio Equipment and Systems (RES); Wideband
transmission systems; Technical characteristics and test conditions for data transmission
equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation
techniques
ETS 300 826:1997 – Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for
2.4 GHz wideband transmission systems and High Performance Radio Local Area Network
(HIPERLAN) equipment. This is a basic standard called out by EN 301 489-17.
EN 301 489-17 v1.1.1 (2000-09) – Electromagnetic Compatibility (EMC) standard for radio
equipment and services; Part 17: Specific conditions for Wideband data and HIPERLAN
equipment.
EN 55022:1998 – Information technology equipment – Radio disturbance characteristics –
Limits and methods of measurement
EN 55024:1998 – Information technology equipment – Immunity characteristics – Limits and
methods of measurement
EN 61000-3-2:1995 +A14 – Electromagnetic compatibility (EMC)
Part 3-2: Limits – Limits for harmonic current emissions (equipment input current up to and
including 16 A per phase)
EN 61000-3-3:1995 – Electromagnetic compatibility (EMC),
Part 3-3: Limits – Limitation of voltage fluctuations and flicker in low-voltage supply systems
for equipment with rated current up to 16 A
EN 60950:1992 + A1 – A4, A11 – Safety of Information Technology Equipment, including
Electrical Business Equipment
European Economic Area Restrictions
The European variant is intended for use throughout the European Economic Area;
however, authorization for use is restricted as follows:
European standards dictate maximum radiated transmit power of 100mW EIRP and frequency
range 2.400 to 2.4835 GHz.
In France, the equipment must be restricted to the 2.4465 to 2.4835 GHz frequency range and
must be restricted to indoor use.