User's Manual

Networking Profile
Use the Xircom Bluetooth Modem Interface and Windows Dial-Up Networking to create a PPP link for connection
to the LAN, as follows
1. Go to Dial-Up networking and double-click Make New Connection.
2. Select Xircom Bluetooth Modem Interface as the modem.
3. Enter the number 1 in the area code and phone number fields, and type in any user ID and password.
Name the connection “Xircom Bluetooth LAN Access.”
4. Go to Control Panel, Dial-up Networking and select Xircom Bluetooth LAN Access. Right-
click the icon and
choose Properties. The settings should be as shown in the screen illustrations below (settings may vary
slightly by operating system version).
5. General:
l
General: Area code=1, Telephone number = 1
l
General: Connect using: Xircom Bluetooth Modem Interface
l
Networking: TCP/IP
l
Security: Log on to Network
l
Disconnect if idle for "5" minutes.
Page
6
of
10
Xircom Bluetooth Adapter
-
Applications
6/22/2001
file://C:\Compliance\Manuals\R2BT\En\help\applications.htm