Operating Instructions

XINRF51
2
BLE TRACKER BEACON – XINRF51
FLASHING INSTRUCTIONS
Connect the XINRF51 JTAG port to the NRF51-DK board.
XINRF51 must be powered with 3.3v to use the NRF51-DK board.
XINRF51 TO NRF51-DK PIN MAPPING
#1 XINRF51 JTAG Header
#2 NRF51-DK JTAG Header
GND
GND DETECT
VCC
VTG
DO
SWD IO
CLK
SWD CLK