User's Manual

37
20
n CID Book
2. Use the soft key to choose the ,
and if available, the numbers are displayed. (You
can also access the CID book directly by pressing
the key in standby mode.)
Select CID Book
Up
3. Use the key to view the numbers, you can
make a call by a press of the key. You can
also add the entry to the phonebook.
When you receive a call, if the caller's
information is transmitted from the network on
which the call was make (and the caller doesn't
hide it), the caller's phone number is displayed.
Moreover, when there is a received call which
you missed, the icon will appear on the LCD.
If the CID memory is full, the icon will blink
on the LCD.
Out Of Area
Private
Menu
- This message will display when
someone calls from an area where the
telephone company is not offering the caller
identification services or is not yet providing
number delivery to your area.
- If the caller has exercised the option
to prevent his name and number from being
sent, the message will show on the LCD.
1. Press the soft key.
View and dial any of the CID
numbers
Note:
At step 3, each item of the incoming list is
marked with the icon if the call has been
reviewed or with the icon if the call hasn't
been reviewed yet.
Add CID Number to Phone Book
1. Perform steps 1 and 2 of previous paragraph.
2. Use the key to view the numbers, when the
desired number displays on the LCD, Press the
soft key to enter menu.
3. Press the soft key, you are prompted to
enter the name.
More Add to PB
Select
HS Reset
This function allows you to reset the Handset
settings to the factory default.
1. Press the key to choose the menu,
press the soft key. You will be prompted
to enter the PIN code.
2. Enter the PIN code (the default one is 0000),
then press the soft key. If the PIN code
is validated all handset settings will return to
the factory default, otherwise a warning tone
will be heard and the settings will remain.
After the resetting, the handset will reset
and return to Standby mode.
HS Reset
Select
Reset
Result:
Selecting a Base
This function allows you to select a base from
those already registered to the handset. You can
access the options by scrolling the menu.
1. Press the key to choose menu,
press the soft key.
Select Base
Select
2. You can use the key to select the base you
want, then press the soft key. If you
select a non-existent base, the handset will
sound a warning tone.
3. The display will show . Press the
soft key to confirm. A confirm tone will
be heard.
Select
Selected BS X
Select