User's Manual

19
38
Add to PB:
Delete:
Delete All:
allows you to add the number to the
phone book. Complete storing the entry by
starting from step 3 described in par."Adding the
Phone Book Entries" (obviously, you will find the
number already entered in the appropriate field).
allows you to delete the selected number.
allows you to delete the whole redial
book.
4. To return to Standby mode, press the
key.
Note
Delete
Delete All Confirm ?
Del Del All
Cancel
:
At step 3, when you select or
options, a message " "
will further ask you to confirm the deletion.
To confirm press the or soft key,
to escape press the soft key.
n Registration
The supplied handset is already registered with
the number 1.
1. Press the key repeatedly to choose the
menu, press the soft
key.
2. Use the key to scroll through the Base
names list, press the soft key to
choose a base to your necessary. The handset
will search for the requested base and the
relevant information will flash on the LCD.
You can register to your base
additional handsets (up to 5 in total) in order to
share the same line with other people.
Before registering a handset to the base, you
should press the key for about 5 seconds until
the In use indicator blinks.
Registration Select
Select
3. If the base is found, and the handset is
successfully registered, you will be prompted
to enter the PIN code (the default one is 0000).
On validation of the PIN code, the
Registration tone will sound and the Base
assigns a number to the handset. If the PIN
code entered is invalid, an warning tone will
sound, and the handset will return to the
previous registration state.
4. If the base is not found, the handset will
behave according to the Out of Range
condition.