User's Manual

12
45
The earmic jack is located in the left side of the
handset and is standard plug. Simply plug
the into the jack and the will be
activated.
2.5mm
earmic earmic
Earmic
jack
Earphone
Microphone
Clip
n Using Earmic (optional)
Earmic plug
Note:
When the earmic is plugged into the earmic jack
the microphone on the handset will be deactivated.
n Message
The feature allows you to leave a message to the
owner who is not at home. When a call is received
in answer-record mode, the machine will play
Announce1, and then performs message
recording. The process is as follows:
After N times ringing, the phone enters answer-
record mode automatically and starts to play
Announce1. The caller can start to record after a
tone.
Play New/Saved Messages
4. The phone will announce "
"or"
. The relevant messages will be
played one by one. During the process the
indicator will blink. You can use the key
to delete the current message or the soft
key to stop the playing and exit.
You have N new
message(s) You have N saved
message(s)"
In
use
Back
Way 1: Using the menu
1. Press the soft key in Standby mode.
2. Press the key to choose , use
the key to confirm.
3. Press the key again to choose
or press the key to choose
, press the key to confirm.
TAM
Down Message
Select
Select New
MSG Down Saved
MSG Select
Note:
During the playing, you can use the or
key to adjust the volume.
Way 2: Using the base unit
When you have one or several new messages,
press the key to play it/them. Use the or
ey to play the desired one. Press the key once
to re-play the current message or press it twice to
play the previous one. If there is no new
messages, press the key to play the saved
messages. Press the key again to finish.
k