User's Manual

47
10
n Connecting Lines
n Installing Battery
Slide the battery cover in the direction of the
arrow and pull it out.
Insert the battery into the battery
compartment. Plug the battery connector into
the receptacle in the battery compartment.
The comes with your
phone. Install the battery before using your phone.
rechargeable Ni-MH battery
2.
1.
Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a
standard phone wall outlet.
Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC adapter
intoastandardACwalloutlet.
1.
2.
To AC wa ll o utl et
Tophonewalloutlet
DC 9V
n TAM Setting
TAM On/Off
You are able to switch the answering machine on
or off.
1. Press the soft key in Standby mode.
2. Press the key repeatedly to choose
, use the key to confirm.
3. Press key again to choose .
4. Use the key to choose or , press the
key.
Way 1: Using the menu
TAM
TAM
Setting Select
Select TAM On/Off
On Off
Select
TAM Alert
A tone will sound when a new message is received.
You are able to switch the tone on or off.
1. Press the soft key in Standby mode.
2. Press the key repeatedly to choose
, use the key to confirm.
3. Press the Down key to choose ,
press key.
4. Use the key to choose or , press the
key.
TAM
TAM
Setting Select
TAM Alert
Select
On Off
Select
Way 2: Using the base unit
Press the key on the base unit to enable or
disable this function, the current state will be
announced.