User's Manual

n LCD Window Icons Description
New Call
Off Hook
Indicates you have missed one
or more calls.
Indicates the line is engaged.
MSG Waiting
Hands-free
Battery Icon
Indicates you have one or more
voice messages.
Indicates the handsfree function
is enabled.
Indicates battery charge level.
Signal Icon
Alarm Icon
Keypad lock
ICM Icon
Indicates the current signal
strength. If the handset is too far
from the base, this icon will blink
on the LCD.
This icon appears when you set
an alarm to ring at a specified
time.
This icon appears when the
keypad is locked.
This icon appears when you have
new message(s).
48
9
Answer mode Select
The answering machine operates in two modes,
"answer and record (Announce1)" or "answer
only (Announce2)". Each mode comes with a pre-
set announcement that is played to your callers.
You can choose the desired mode as follows:
1. Press the soft key in Standby mode.
2. Press the key repeatedly to choose
, use the key to confirm.
3. Press the key repeatedly to choose
, press the key.
4. Use the key to choose or
, press the key.
TAM
TAM
Setting Select
ANNC
Select Select
Announce1
Announce2 Select
Notes:
If you choose Announce2, the caller hears
your announcement but will not be able to
leave a message.
The Announce2 is also played when your
answering machine becomes full.
Set the ring delay
The ring delay is the number of rings after the
answering machine takes an incoming call and
plays your announcement. You can select from 2
to 6 rings or Toll Saver mode. If you select
, when there are new messages waiting to
be played back, the answering machine will
respond after 3 rings, otherwise it will respond
after 6 rings.
1. Press the soft key in Standby mode.
2. Press the key repeatedly to choose
, use the key to confirm.
3. Press the key repeatedly to choose
, press the key.
4. Use the key to choose the answer rings (
~ or ), press the
key.
Toll
Saver
TAM
TAM
Setting Select
Set
Ring Select
2
Rings 6 Rings Toll Saver
Select