User's Manual

21
n Muting the Microphone
During a conversation, you can temporarily
switch your phone's microphone off, so that the
other party cannot hear you.
Example: You want to say something to another
person in the room but do not want
the other party to hear you.
To mute your microphone, press the soft
key during the conversation. The " "
appears on the LCD.
Mute
Call Muted
To unmute the microphone, press the
soft key on the cordless handset. You will restore
the normal condition.
Unmute
n Amplification Function
Your phone is equipped with a specialized
amplification function designed to fit your
needs. During a conversation you can adjust
the or control on the left side of
the handset and use the key on the right
side. You can also adjust the control to
fit the levels to your hearing requirements.
Vol+ Vol-
Tone
The selected volume will be displayed on the
LCD.
AMP
By default the handset volume is set to
volume 5.
When you press the key in receiver mode
during a conversation, the red Amplify indicator on
the handset lights on. If you press the key
again, the indicator will go out.
This telephone can produce very high
(loud) sound levels. Repeated incremental
exposure to amplification levels greater than 18
dB may be harmful to people without hearing loss.
CAUTION:
AMP
AMP
30
You can store up to 5 numbers in direct memories.
All the numbers will be stored in the phone book.
Storing Memory Numbers
Dialing from One-touch Memories
In the standby mode, press one of the memory
keys ( ~ , ) to dial out the corresponding
number.
M1 M4 SOS
1. Press the memory key ( ~ , ) in the
standby mode.
2. The display shows " ". Enter the
desired number (up to 24 digits), press the
soft key.
3. Use to select the ring you like to
associate with the number, press the
soft key to confirm.
M1 M4 SOS
Number ?
Save
Select
or key
Viewing Memory Numbers
1. In the standby mode, press the key.
2. Press repeatedly until the desired
number is displayed.
or key
Editing Memory Numbers
Perform the steps of the Editing the Phone book
Entries paragraph. Please refer to page 35.
“
”
Note:
The memory default names are M1~M4 and
SOS, you can add a name after them but
cannot delete the default name. e.g. you can
modify M1 to M1: home.
Deleting Memory Numbers
Perform the steps of the Deleting the Phone book
Entries paragraph. Please refer to page 35.
“
”
n One-touch Memories