User's Manual

32
n Menu Map
1. CID Book (see page 26)
Auto Answer
Amplified
(see page 41)
(see page 42)
(see page 42)
(see page 43)
(see page 44)
Date&Time
Selected BS
LCD Contrast
4. HS Settings
Alarm
Ring Setup
Tone Set u p
Language
HS Name
(see page 39)
(see page 23)
(see page 40)
(see page 28)
(see page 41)
6. Registration (see page 45)
7. Default (see page 46)
2. Phonebook
3. BS Settings
New
View
Edit
Delete
Delete All
PB Status
(see page 34)
(see page 34)
(see page 35)
(see page 35)
(see page 35)
(see page 36)
Delete HS
Dial Mode
Flash Time
Modify PIN
(see page 37)
(see page 37)
(see page 38)
(see page 38)
5. Bluetooth
Add Device
Device List
(see page 16)
(see page 16)
19
Basic Functions
n Making a Call
You can enter the desired phone number in
standbymode,whichallowsyoutomake
corrections before dialing. Follow these steps:
1. Enter a telephone number (up to 24 digits).
Check it. You can also use the soft key
to delete the last digit or key to insert a
pause if necessary.
Erase
1. Lift the handset and press or .
3. To end the call, either press or replace
the handset on the base.
2. Dial a telephone number.
2. When the number appears correctly, press
or .
All descriptions in this manual assume that the telephone is in standby mode. Set the cordless handset
to standby mode by pressing the key.
During a call, you can switch between the
handset and the Bluetooth headset.
1. During a call with the handset, press , the
call switches to the Bluetooth headset.
2. To switch back, press , the call switches
back to the handset.
Call Switching
Notes:
The DECT handset must be first paired and
connected to the headset via Bluetooth. For
more details please refer to Bluetooth section.
Check the manual of your Bluetooth headset
for more information.