User's Manual
14
If the handset is in power off mode, when you
place the handset on the base, it automatically
turns on. To turn the handset on or off in
standby mode, follow these steps:
1. , press
and hold the key until you switch the
display on. On power up, the handset will
enter subscription mode and search for a
registered base. A message as shown below
will be displayed to the user, and the signal
icon will flash.
To turn on the handset when it's off
If the handset is successful in finding a base,
the handset will enter the standby mode, the
display will show handset number and the
handset name (if you have one saved as
described on page 40), signal icon, battery icon
and current time. If the handset is unsuccessful
in finding a base, the handset will behave
according to the Out of Range condition.
n Turning Handset On/Off
2. , keep the key
pressed until the display disappears.
To turn off the handset
Note
YOU SHOULD FULLY
CHARGE THE HANDSET BEFORE USING.
:
Nothing will appear on the LCD when battery
power is very low.
Searching
37
n Base Settings
Delete HS
This function allows you to delete a handset
registration from the base.
soft key
3. Press the soft key to choose
menu. The display shows " " to
prompt you to enter the PIN Code (The
default PIN Code is "0000"). Then press the
soft key.
4. Use to select a handset, press
the soft key.
, a warning tone will be heard.
5. After that, the selected handset will behave
according to the unregistered condition.
BS Settings
Select
Select Delete
HS PIN?
Select
Select
1. Press the soft key.
2. Press or key to choose ,
then press the .
or key
Menu
If you select the current
handset you are using or if you select a non-
existent handset
Dial Mode
You can select to change the dial mode by the
following steps:
1. Press the soft key.
2. Press repeatedly to choose
, and press the soft key.
3. Press to choose , then press
the soft key.
Menu
BS
Settings Select
Dial Mode
Select
Select
or key
key
or key4. You can press to select the
required dial mode options ( / ) and
press the soft key. A confirm beep will
be heard.
Tone Pulse