User's Manual

40
11
n Installing Batteries
1.
2.
3.
Slide the battery cover in the direction of the
arrow and pull it out.
Insert new batteries as indicated, matching
correct polarity (+,-).
Reversing the orientation may
damage the handset.
When replacing the batteries,
always use good quality Ni-MH AAA
re-chargeable batteries. Never use
other battery.
Notes:
The three rechargeable Ni-MH batteries (AAA size,
1.2V, 800mAh) come with the handset. Install the
batteries before use. The batteries need to be
replaced if they do not recover their full storage
capacities after recharging.
To replace the battery cover,
slide the cover up until it
snaps in place.
Key Tone
1. Press the soft key.
2. Press or key to choose ,
then press the .
or key
or key
Menu
H
Every time you press a key, your handset
acknowledges it with a key tone. You can
disable the key tones for a silent use. I
3. Press to choose
menu, press the soft key.
4. Press the soft key again to choose
.
5. You can use to choose or
to enable or disable the function.
6. Press the soft key.
Tone Setup
Select
Select
Key Tone
On Off
Select
ncertain
error conditions, a warning tone will sound
when an incorrect key is pressed.
soft key
S Settings
Select
Note:
For normal use, we recommend you
leave the key tone enabled. This makes
the phone easier to use.
Range Alarm
or key
or key
key
or key
A beep will sound when the handset is out of
range of the Base . You are able to
select to enable/disable this audible warning.
1. Press the soft key.
2. Press repeatedly to choose
, press the soft key.
Menu
HS
Settings Select
during a call
3. Use to choose , then
press the soft key.
4. Press the to choose , then
press the soft key.
5. Use to choose / to enable
/disable this audible warning, then press the
soft key, you will hear a confirm beep.
Tone Setup
Select
Range Alarm
Select
On Off
Select