User's Manual

41
n Connecting Lines
10
Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a
standard phone wall outlet.
Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC adapter
intoastandardACwalloutlet.
1.
2.
To AC w al l ou tle t
Tophonewalloutlet
HS Name
or key
or key
Using this feature, you can define a name of the
handset in order to easily recognize your handset
if you have more than one registered to the same
base. But when you reset the handset, the
handset name will be deleted.
1. Press the soft key.
2. Press repeatedly to choose
, press the soft key.
3. Use to choose , then
press the soft key.
4. You can enter the handset name (up to 12
characters) by using the alphanumeric keys
(use the soft key to delete the incorrect
characters), then press the soft key to
confirm and exit. The handset name will be
displayed above your handset number in
standby mode.
Menu
HS
Settings Select
HS Name
Select
Erase
Save
The adjustment allows you to optimize the
visibility of the display by changing its contrast
according to the environment conditions.
1. Press the soft key.
2. Press or key to choose ,
then press the .
3. or key repeatedly to choose
, then press the soft key.
4. Use or key repeatedly to choose among
the 17 available contrast levels (0~16), then
press the soft key.
Menu
H
LCD
Contrast Select
Save
S Settings
Select soft key
Press
LCD Contrast Setting