User's Manual

556
n Phone Layout and Keys Function (continued)
Base
Rear View
Power
Jack
Phone
Line
Jack
Charge pins
Base display
Microphone
Speaker
TAM Reset
This function allows you to reset the TAM settings
to the factory default.
1. Press the soft key in standby mode.
2. Press Up key or Down key repeatedly to
choose , press the key.
3. Press Up key or Down key to choose
the , press the soft key.
You will be prompted to enter the PIN code.
4. Enter the PIN code (the default one is 0000),
then press the soft key. If the PIN code
is validated all TAM settings will return to the
factory default, otherwise a warning tone will
be heard and the settings will remain.
After resetting, the TAM will return to
standby mode.
TAM
TAM Setting Select
TAM Default Select
Reset
Result:
Week Date Setting
Before each message is played, the week and time
it was received will be announced. You are able to
use the to set the week date.
In the active mode (all lights on) press and hold
the key on the base until the current setting is
announced. Press the key repeatedly to set,
use the key to confirm. Every time you press
the key, the system will announce the
corresponding week date.
base
Note:
If you remove the battery or pull out the
adapter, you need to set the week date
again.
Charge
Indicator