User's Manual

35
26
n HS Name
n Range Alarm
Using this feature, you can define a name of the
handset in order to easily recognize your handset
if you have more than one registered on the
same base. To set the handset name:
1. Press the soft key.
2. Press Up key or Down key repeatedly to
choose , press the soft
key.
Menu
HS Settings Select
3. Press Up key or Down key to choose
, then press the soft key.
4. You can enter the handset name (up to 12
characters) by using the alphanumeric keys
(use the soft key to delete the incorrect
characters), then press the soft key to
confirm and exit. The handset name will be
displayed above your handset number in
standby mode.
HS
Name Select
Erase
Save
A beep will sound when the handset is out of
range of the Base. You are able to select to
enable/disable this audible warning.
1.Pressthe softkey.Menu
2. Press Up key or Down key repeatedly
to choose , press the
soft key.
HS Settings Select
3. Use Up key or Down key to choose
, then press the soft key.
4. Press the key to choose
,pressthe softkey.
5. Use Up key or Down key to choose
or to enable or disable this audible
warning, then press the soft key, you
will hear a confirm beep.
Tone Setup Select
Down Range
Alarm Select
On Off
Save
n BS Settings
Terminate HS
This function allows you to delete a handset
registration from the base.
3. Press the soft key to choose the
menu. The display shows
" " to prompt you to enter the PIN Code
(The default PIN Code is "0000"). Then
press the soft key.
4. Use Up key or Down key to select a
handset. If you select the current handset or
a non-existent handset, a warning tone will
be heard.
5. Press the soft key to confirm, and the
selected handset will behave according to
the unregistered condition.
Select
Terminate HS
PIN?
OK
Select
1. Press the soft key.
2. Press Up or Down key to choose
, then press the soft key.
Menu
BS Settings Select
key
Flash Time
You can select to change the Flash time by the
following steps:
1. Press the soft key.
2. Press Up or Down key to choose
, then press the soft key.
3. Press Up or Down key to choose
menu. Press the soft key.
4. The display shows the current setting. Use Up
or Down key to select
/ , press soft key.
Menu
BS Settings Select
Flash Time Select
Flash-1
Flash-2 Save
key
key
key