User's Manual
40
21
Add to PB:
Delete:
Delete All:
allows you to add the number to the
phone book. Complete storing the entry by
starting from step 4 described in par."Adding the
Phone Book Entries" (obviously, you will find the
number already entered in the appropriate field).
allowsyoutodeletetheselectednumber.
allows you to delete the whole redial
book.
4. To return to standby mode, press the
key.
Note
Delete
Delete All Confirm ?
Del Del All
Cancel
:
At step 3, when you select or
options, a message " "
will further ask you to confirm the deletion.
To confirm press the or soft key,
to escape press the soft key.
HS Reset
If you reset the handset, all the features under
menu will be restored to the factory
initial setting: Alarm, Audio Setup, Ring Setup,
Tone Setup, Language, HS Name, Auto Answer
and Date & Time. But LCD Contrast can not be
restored.
Up key or Down key
3. Press Up key or Down key to choose the
menu, press the soft key. You
will be prompted to enter the PIN code.
4. Enter the PIN code (the default one is 0000),
then press the soft key. If the PIN code
is validated all handset settings will return to
the factory default, otherwise a warning tone
will be heard and the settings will remain.
After resetting, the handset will return to
standby mode.
HS
Settings
HS Reset Select
Reset
Result:
1. Press the soft key.
2. Press repeatedly to
choose , then press the soft
key.
Menu
HS Settings Select
Selecting a Base
This function allows you to select a base from
those already registered to the handset. You can
access the options by scrolling the menu.
Up key or Down key
3. Press Up key or Down key to choose
menu, press the soft key.
4. You can use Up key or Down key to
select the base you want, then press the
soft key. If you select a non-existent
base, the handset will sound a warning tone.
5. The display will show . Press the
soft key to confirm. A confirm tone will
be heard.
Select Base Select
Select
Selected BSX
Select
1. Press the soft key.
2. Press repeatedly to
choose , then press the
soft key.
Menu
HS Settings Select