User's Manual

18
43
n Muting the Microphone
During a conversation, you can temporarily
switch your phone's microphone off, so that the
other party cannot hear you.
Example: You want to say something to another
person in the room but do not want
the other party to hear you.
To mute your microphone, press the soft
key during the conversation. The " "
appears on the LCD.
Mute
Call Muted
To unmute the microphone, press the soft
key again. You will restore the normal condition.
Mute
n Amplification Function
Your phone is equipped with a specialized
amplification function designed to fit your
needs. During a conversation you can adjust
the or control on the left side of
the handset and use the key on the right
side. You can also adjust the control to
fit the levels to your hearing requirements.
Vol+ Vol-
AMP
Tone
The selected volume will be displayed on the
LCD.
When you press the key in receiver mode
during a conversation, the Amplify indicator on the
handset lights on. If you press the key again,
the indicator will go out.
Please n
AMP
AMP
ote that the default setting is: Volume:3,
Tone:2, Amplify:Off.
You can also select the earpiece volume or the
speaker volume by the in Menu
under , as described in page 38.
Audio Setup
HS Settings
n Registration
The supplied handsets are already registered
with the number 1 and 2.
in order to share
the same line with other people.
Before registering a handset to the base, you
should press and hold base unit key for about
5 seconds then release it.
2. Press Up key or Down key repeatedly
to choose the menu, press
the soft key.
3. Use Up key or Down key to scroll
through the Base names list, press the
soft key to choose a base to your necessary.
The handset will search for the requested
base and the relevant information will flash on
the LCD.
Registration
Select
Select
You can register up to
5 handsets to the same base
1. Press the soft key.Menu
4. If the base is found, and the handset is
successfully registered, you will be prompted
to enter the PIN code (the default one is 0000).
Enter it then press the soft key the
PIN code is correct, the Registration tone will
sound and then the base assigns a number to
the handset, otherwise a warning tone will
sound, and then the handset returns to the
previous registration state.
5. If the base is not found, the handset will
behave according to the Out of Range
condition.
Select .If