User's Manual

17
44
n Receiving a Call
When a call is received, t
If the caller can be identified, the caller's
phone number is displayed. If the caller
cannot be identified, only the
displays.
1. To answer the call, press the key. If
you have activated the Auto Answer
function, when the handset is on the
base,simplyliftituptoanswer.
he
information will appear.
information If you have a voice
message, the " " and icon
will be shown on the LCD.
2. To end the call, either press the key
or replace the handset on the base.
New Call
New Call
MSG WTG ON
Result: After you hang up the call, the LCD
displays the call duration.
Notes:
Youcanselecttheringervolumebyusing
when the phone rings
with an incoming call.
If you want to deactivate the icon, press the
Up key in standby mode, then press and
hold the key. After that, press the key to
return to standby mode. (The handset must be
registered to the base.)
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after the
caller's hang-up or after the parallel phone
had answered the call.
Up
key or Down key
n Calling with more than one Handset
If you have more than one handset registered to
the same base, you can make internal calls and
transfer an external call between the registered
handsets.
1. Press the key, the LCD displays as
follows, then enter the number of the handset
you want to call.
Making an internal call
Left
2. If the destination handset is not available, the
handset will return to standby mode. If the
handset entered is valid, the called handset
will ring and display . The handset
user can press the key to answer the
internal call.
3. At the end of your conversation, press the
key.
HSX Calling
Call transfer between handsets
You can transfer an external call between the
handsets those are registered to the same base.
1. During an external call, press the key
and then the number of the handset you want
to transfer the call to.
Left
2. If the called party can answer your call, he/she
can press the key to talk with you. At this
time you can inform him/her of the incoming
call.
3. When the called handset answers, press the
key or replace the handset to the base to
complete the transfer.
12345
Intercom
Note:
During the internal call, if an external call
comes in, the LCD will show the caller's
number. You should press the key to end
the internal call first then press the key
to answer the call.