User's Manual

45
16
Basic Functions
n Making a Call
You can enter the desired phone number in
standbymode,whichallowsyoutomake
corrections before dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits).
Check it. You can also use the key
to insert a pause.
Right
The system will announce
you the number you are just inputting if you
have switched the Talk Keypad function on.
1. Pick up the handset and press the key.
3. To end the call, either press the
2. Dial a telephone number.
key
orreplacethehandsetonthebase.
Result: The iconappearsontheLCD.
Note:
You can store up to 10 telephone numbers in
memory for automatic dialing.
Note
Redial
:
To make a call to the last number you dialed,
use the feature. For details, see page
20.
Note
Erase
:
If you make a mistake while entering a
number, press the soft key to clear
thelastdigit.
2. When the number appears correctly, press
the key.
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the key.
Setting up a 3-way conference call
When you have both an external call and an
intercom call in progress, you can set up a three-
way conference call, like this:
2. The called party press key to answer.
3. The calling party can press the key to start
the 3-way call.
1. During an external call, press the key
and then the number of the handset you want
to join the 3-way call.
Left
4. Either of the two internal handsets can press
the key to leave the conference call at any
time.
Note:
If one of the handsets drops the conference
call, the remaining handsets will continue the
conference.