User's Manual

46
15
If the handset is in power off mode, when you
place the handset on the base, it
automatically turns on. To turn the handset on
or off in standby mode, follow these steps:
1. , press
and hold the key until you switch the
display on. On power up, the handset will
enter subscription mode and search for a
registered base. A message as shown
below will be displayed to the user, and the
signal icon will flash.
To turn on the handset when it's off
If the handset is successful in finding a base,
the handset will enter the standby mode, the
display will show handset number and the
handset name (if you have one saved as
described on page 26), signal icon, battery icon
and current time. If the handset is unsuccessful
in finding a base, the handset will behave
according to the Out of Range condition.
n Turning Handset On/Off
2. , keep the key
pressed until the display disappears.
To turn off the handset
Note
YOUSHOULDFULLY
CHARGE THE HANDSET BEFORE USING.
:
When battery power is very low, if you place
the handset on the base, the display will
show as below.
Searching...
Charging...
n Caller ID on call waiting
When you subscribe to Call Waiting service
from your local telephone company, the
telephone will display the name and number
of the second caller while you are having a
conversation.
Caller 1
4361234
Caller 1
4
Caller 2
2915678
Caller two's information
is displayed
Caller ID info displayed
1.When you are on the line, the telephone will
automatically display the name and number of
the second caller.
2.Press the soft key to answer the second
caller.
3.When you have finished, press the soft
key to continue with your conversation with the
first caller.
Flash
Flash
Note:
If you have transferred an external call to
another handset, you cannot use the call
waiting function via the second handset.