User's Manual

47
14
To wall-mount your phone follow these steps:
1. Install the two self-tapping screws (not supplied) at
a distance of 60mm from each other and located on
a horizontal line.
2. Install the mounting bracket as shown in the figure
on the right.
3. Place the phone onto the screw-heads and slide
down to secure.
n Wall Mounting (optional)
Screw head
Wall
TAM Functions
n Announcement
It is necessary to record the announcement which
requests the caller to leave a message when
nobody is at home. The answer and record
message (Announce1) and the answer only
message (Announce2) can be up to 3 minutes
respectively.
Auto-answer Announce1 is a conventional
message requesting you to leave a message. If
you have not record Announce1 before, the unit
will play the default one "
".
Record Announce1
Hello, your call
cannot be taken at the moment, to record
your message, please speak after the tone
2. Press the soft key to choose .
3. Press key again to choose .
4. Press Up key or Down key repeatedly to
choose , press the soft key.
5. You can record your announcement after a tone.
Recording will stop automatically after 3
minutes. You can also confirm and end the
recording by pressing the key. During
recording the LCD shows " ".
Select Announce
Select Announce1
Record Select
OK
Recording...
If you want to change Announce1, do the
following steps to update it:
1. Press the soft key in standby mode.TAM