User's Manual

50
11
n Connecting Lines
n Installing Batteries
Slide the battery cover in the direction of the
arrow and pull it out.
Insert new batteries as indicated, matching
correct polarity (+,-).
The rechargeable Ni-MH batteries (AAA size) come with
your phone. Install the battery before using your
phone.
2.
1.
Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a
standard phone wall outlet.
Connect the modular ends of the two power
adapters to the power jacks of the base and the
charger, then plug the AC adapters into standard AC
wall outlets.
1.
2.
To AC wall outlet
Tophonewalloutlet
n Message
This feature allows the caller to leave a message
to the owner who is not at home. When a call is
received in answer-record mode, the machine will
play Announce1, and then performs message
recording. The process is as follows:
After N times ringing, the phone enters answer-
record mode automatically and starts to play
Announce1. The caller can start to record after a
tone.
Play New/Saved Messages
4. The phone will announce "
"or"
. The relevant messages will be
played one by one. You can use the key to
delete the current message or the soft
key to stop the playing and exit.
You have N new
message(s) You have N saved
message(s)"
Back
Way 1: Using the menu
1. Press the soft key in standby mode.
2. Press the key to choose ,
use the key to confirm.
3. Press the key again to choose
or press the key to choose
, press the key to confirm.
TAM
Down Message
Select
Select New
MSG Down
Saved MSG Select
Note:
During the playing, you can use the or
key to adjust the volume.
Way 2: Using the base unit
When you have one or several new messages,
press the key to play it/them. If there are no
new messages, press this key to play the saved
messages. Press the key once to re-play the
current message, press it twice to play the
previous one or press the key once to play the
next one. Press the key again to finish.