User's Manual Part 2

44
13
Restore Announce1/Announce2
1. Press the soft key in Standby mode.
2. Press the soft key to choose .
3. Press soft key to choose or
press the key to choose ,
then press the key to confirm.
4. Press the key repeatedly to choose ,
press the key to confirm.
5. The LCD will show . Press the
key to restore the default Announce1
/Announce2 or press the key to cancel.
TAM
Select Announce
Select Announce1
Down Announce2
Select
Default
Select
Confirm ? Select
Back
Play Announce1/Announce2
You can play the current Announce1/2.
1. Press the soft key in Standby mode.
2. Press the soft key to choose .
3. Press soft key to choose or
press the key to choose ,
then press the key to confirm.
4. Press the soft key to choose .
5. The current Announce1/2 will be played. During
the process you can use the soft key to
stop and exit.
TAM
Select Announce
Select Announce1
Down Announce2
Select
Select Playback
Back
n Making a Call
Making a call
You can enter the desired phone number in
Standby mode, which allows you to make
corrections before dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits).
Check it. You can also use the key to
insert a pause.
Right
1. Pick up the handset and press the key.
3. To end the call, either press the
2. Dial a telephone number.
key
or replace the handset on the base.
Result: The icon appears on the LCD.
Basic Functions
Note:
You can store up to 10 telephone numbers in
memory for automatic dialing.
Note
Redial
:
To make a call to the last number you dialed,
use the feature. For details, see page
17.
Note
Erase
:
If you make a mistake while entering a
number, press the soft key to
clear the last digit.
2. When the number appears correctly, press
the key.