User's Manual Part 2

32
25
n BS Settings
Terminate HS
This function allows you to delete a handset
registration from the base.
3. Press the key to choose the
menu. The display shows
" " to prompt you to enter the PIN Code
(The default PIN Code is "0000"). Then
press the soft key.
4. Use the key to select a handset. If you
select the current handset or a non-existent
handset, a warning tone will sound.
5. Press the to confirm, and the
selected handset will behave according to
the Out Of Range condition.
soft key
soft
soft key
BS Settings
Select
Select
Select
Terminate HS
PIN?
OK
1. Press the soft key.
2. Press the key to choose ,
then press the .
Menu
Flash Time
You can select to change the Flash time by the
following steps:
1.
2. Use the key to choose menu.
Press the soft key.
3. The display shows the current setting. Use the
key to select / , press
soft key.
Flash Time
Select
Flash-1 Flash-2
Save
Perform steps 1 and 2 of previous paragraph.
During a call, you may turn on the
speakerphone built in the handset. In this
mode you can simply put your handset on a
surface (e.g. a desk) and enjoy the comfort
of the handsfree conversation.
, press the
during a call (line engaged). The icon
appears on the LCD.
To turn the feature on key
To turn the feature off, and keep on talking in
normal mode, press the key again. The
icon will disappear.
n Handsfree
Notes:
Before putting the handset near your ears,
be sure you have turned the speakerphone
off.
To adjust the speakerphone volume, see
page 15 or page 35.
When the line is engaged, pressing the soft
key sends the Flash signal. This key is used in
conjunction with special services (e.g. call waiting)
which can be available in your phone network.
For further details please contact your network
telephone company.
Flash
n Flash Signal
To use the said special services, just press the
soft key while the line is engaged: the
display will show .
Flash
R